Warning: Illegal string offset 'html' in /home/nissansi/public_html/forums/cache/skin_cache/cacheid_1/skin_topic.php on line 907
FS: 97 180sx Type X $15,000 - Hardtuned.net

Jump to content


- - - - -

FS: 97 180sx Type X $15,000 

3 replies to this topic

#1 bluebanana

  • Joined:29-September 12
  • Location:Australia NSW

Posted 28 April 2017 - 09:04 PM

120 xxx km

109 xxx km on s15 dash

ENGINE:

- SR20DET 210kw 14.5 psi

- Tomei PonCams

- Garret GT-2860RS turbo

- Earls braided turbo lines (oil line not fitted)

- Walbro hi-flow fuel pump

- Z32 AFM

- Nismo 740CC Injectors

- Greddy FMIC

- Greddy intake pipe

- Stainless steel manifold

- Gktech dump+front pipe

- Nismo catback

- HKS super dragger muffler

- ProfecB Spec2 EBC

- Nistune Piggyback ECU

- GFB deceptor pro

- Morroso oversized sump

- HKS Oil filter relocation

- Powercoated rocker cover + modified breather (no T piece)

- Gktech airbox

- Gktech catch can

- Gktech eccentric throttle wheel

- Gktech rocker arm stopper

- Battery in boot with isolator


COOLING

- 52mm radiator

- Gktech fan

- Low temp thermostat

- Earls power steering cooler with braided lines

- HKS oil cooler

- Greddy swirl pot

- Yoshi factory water pump pulley


SUSPENSION:

- Whiteline rear adjustable swaybar

- Gktech front adjustable swaybar

- Cusco fully adjustable toe/camber/traction/control rods

- Hardrace rear knuckle bushes

- 5 stud rear hubs

- Gktech 5 stud conversion spacers in front

- Gktech solid steering shaft spacer


BRAKES:

- Slotted rotors all round

- Gktech abs delete

- Gktech braided brake lines

- Z32 front calipers

- S15 brake master cylinder

- Pmu B-spec pads rear

- QFM front pads

- Gktech master cylinder stopper

- S14 wheels

- Gktech wheel nuts


DRIVETRAIN:

- Toda lightweight flywheel

- Exedy 3 puk clutch

- Nismo slave cylinder

- Nismo 1 way 4.3 diff

- New front bearings, seals and gaskets in gearbox

- Gktech shifter springs + bushings + pivot ball

- Gktech braided clutch line

- Cusco engine mounts

- Nismo gearbox mount

- Gktech solid diff bushes

- Short shifter


BRACING:

- Cusco 3 point rear strut brace

- Custom made 4pt boot brace

- Custom c pillar brace

- Ultra racing fender brace

- Nismo power brace

- Tomei 3 point strut brace

- Spot welded complete interior + removed sound deadening

- Cusco side intrusion brace


INTERIOR:

- Mongoose alarm system with 3-point immobiliser

- S15 dash conversion (fully functional)

- S15 floor mats

- S15 scuff plates

- S15 rear view mirror

- S15 sunvisors

- S15 dome light

- S15 passenger seat

- Nismo leather gearknob

- Pivot headlight controller

- Apexi ecv

- Black headlining

- Bride Gias Low Max replica driver seat

- Genuine Bride rail

- Nismo clutch pedal bracket

- Fire extinguisher

- Kill switch

- Replica Defi gauges in air vent (oil pressure gauge doesnt want to work atm)

- Autometer Boost gauge mounted on a piller


BODY:

- 2up carbon roof spoiler

- Raybrig headlights

- Kmak fbreglass front + rear lip

- Gktech aero mirrors

- RPS13 carbon fibre OEM centre garnish

- OEM nissan rain deflectors

- Shaved rear wiper + 3rd brake light

- New oem door seals

- ONE 80X plates included with sale


No A/C. No ABS - not supplied

No interior in boot, will be supplied.

Can also supply (for the right price) :

- S15 rear subframe with Gktech solid offset bushes installed, S15 rear lca's and Gktech weld in braces (not welded yet) aswell as a 2 bolt diff hat cleaned up and ready to go.

- S15 driver seat

- Ultra racing 4 point front lower brace


Has 3 folders full of reciepts starting from first Australian owner..


Bad points - Boot paint is starting to crack (had too many spoilers in its life) and a bit of a dent left rear quarter quarter


No joy rides, no stupid offers

Attached Thumbnails

  • Attached Image: $_20 (5).JPG
  • Attached Image: $_20 (1).JPG
  • Attached Image: $_20 (2).JPG
  • Attached Image: $_20 (3).JPG
  • Attached Image: $_20 (6).JPG
  • Attached Image: $_20.JPG


#2 S15 sxytime

  • Joined:18-March 09
  • Location:Australia SA
  • Car:S15 GT spec R

Posted 28 April 2017 - 09:13 PM

Location, price, receipts for work done / parts?

#3 bluebanana

  • Joined:29-September 12
  • Location:Australia NSW

Posted 28 April 2017 - 09:48 PM

Sorry.

Price: $15 000

Location: Carlignford

Have over 15k in receipts from first australian owner. Majority of work done myself as I'm a mechanic.

#4 Typex

  • Joined:27-July 14
  • Location:Australia NSW
  • Car:180sx type x

Posted 24 July 2017 - 09:11 PM

pmd





2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users

Common Links

  • About Us
  • Privacy Policy
  • User Agreement
  • Help & Support Forums
  • Advertise
  •  

    By your continued use of this site, you agree to follow all Rules & Guidelines and abide by the User Agreement outlined in our Terms & Conditions.

    Hardtuned Network is hosted by Sanity Technology

    Design, Site Management & Hotness provided by Loz.

    Big thanks to all our members and volunteers for making this network what it is today!