Warning: Illegal string offset 'html' in /home/nissansi/public_html/forums/cache/skin_cache/cacheid_1/skin_topic.php on line 907
Some of my Fabrication Pics - Hardtuned.net

Jump to content


Some of my Fabrication Pics 

223 replies to this topic

#1 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 06:06 PM

Loving this section!Posted Image
Ok, so here's some pics of my work. Tell me what you think.




GTR surge tank
Attached File  3r5r54.jpg   206.53K   184 downloads
Attached File  53r535.jpg   172.63K   162 downloads




GTR Sump extension
Attached File  14082008045.jpg   721.99K   165 downloads
Attached File  14082008040.jpg   692.02K   172 downloads
Attached File  14082008041.jpg   644.54K   166 downloads
Attached File  14082008042.jpg   801.85K   154 downloads
Attached File  14082008043.jpg   530.76K   148 downloads
Attached File  14082008044.jpg   660.31K   160 downloads



Little Radiators
Attached File  IMG_0214.jpg   1.95MB   167 downloads

Attached File  IMG_0219.jpg   1.85MB   161 downloads

Edited by mitch bucannon, 04 March 2011 - 04:33 PM.


#2 -Truck-

  • Joined:19-March 10
  • Location:Australia SA
  • Car:VIP Y31 Cima

Posted 28 February 2011 - 06:08 PM

you sir, are a very gifted welder Posted Image

how long did it take you to master it?

#3 STR8E180

  • Joined:30-April 03
  • Location:Australia NSW
  • Car:GTR R34 V-SPEC

Posted 28 February 2011 - 06:09 PM

good stuff mate
very nice fabrication work
where do u work?

#4 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 06:11 PM

Not master yet, theres always room for improvement! ive been TIG welding for about 6-7 years.

#5 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 06:15 PM

Should i keep adding pics along the way, or edit ,my first post?

#6 STR8E180

  • Joined:30-April 03
  • Location:Australia NSW
  • Car:GTR R34 V-SPEC

Posted 28 February 2011 - 06:16 PM

Just keep adding along the way thats what I'm doing

#7 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 06:19 PM

Wheel Repair
Attached File  30092008103.jpg   701.86K   135 downloads
Attached File  30092008102.jpg   772.83K   150 downloads
Attached File  11022009279.jpg   672.37K   159 downloads

#8 STR8E180

  • Joined:30-April 03
  • Location:Australia NSW
  • Car:GTR R34 V-SPEC

Posted 28 February 2011 - 06:25 PM

Good to see some more fabricators posting their work up
I've never repaired rims In my life normally just send them away to get done

#9 RRP1

  • Joined:21-February 07
  • Location:Australia VIC

Posted 28 February 2011 - 06:34 PM

very nice work man i can always appreciate good welding.

#10 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 06:36 PM

Cheers man, ive got heaps of photos, so ill get em up here eventually.

#11 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 06:45 PM

Airbox



Attached File  07082009475.jpg   726.05K   138 downloads

Attached File  07082009477.jpg   678.71K   187 downloads

Attached File  07082009472.jpg   840.45K   141 downloads

Attached File  07082009473.jpg   636.32K   148 downloads

Attached File  07082009474.jpg   763.7K   137 downloads

#12 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 06:55 PM

This is a full exhaust i made for a Civic. Didi my head in making the headers! They had to be a certain length to all the mergers, and shit like that. Like, within 10mm if each other!! (length wise)


Attached File  PICT0416.JPG   1.95MB   185 downloads
Attached File  Image077.jpg   310.93K   177 downloads

Attached File  Image078.jpg   408.03K   186 downloads

Attached File  Image079.jpg   384.57K   162 downloads

Attached File  Image080.jpg   390.57K   160 downloads

Attached File  PICT0410.JPG   1.76MB   143 downloads

Attached File  PICT0413.JPG   2.22MB   162 downloads

#13 beamboy

  • Joined:28-June 08
  • Location:Australia NSW
  • Car:S13 Silvia

Posted 28 February 2011 - 07:00 PM

Nice work mate. Good to see

#14 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 07:17 PM

Methanol Tank



Attached File  15082008050.jpg   626.54K   120 downloads

Attached File  15082008052.jpg   493.73K   140 downloads

Attached File  r532.jpg   322.29K   132 downloads

#15 ALL-W3T

  • Joined:18-July 06
  • Location:Australia NSW
  • Car:Bluebird

Posted 28 February 2011 - 07:21 PM

This is good stuff, The WRX airbox is perfect, very inspired to try figure out my high frequency settings for alloy on my tig. Can I ask what welder you use??

#16 STR8E180

  • Joined:30-April 03
  • Location:Australia NSW
  • Car:GTR R34 V-SPEC

Posted 28 February 2011 - 07:22 PM

Really nice work mate

#17 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 07:24 PM

Oil cooler and duct


Attached File  20032009306.jpg   815.14K   151 downloads

Attached File  20032009308.jpg   953.52K   131 downloads

Attached File  20032009309.jpg   869.4K   135 downloads

Attached File  20032009312.jpg   799.17K   134 downloads

Attached File  23032009326.jpg   724.17K   115 downloads

Attached File  23032009318.jpg   745.36K   120 downloads

#18 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 07:25 PM

Thanks guys. I use a Fronius Magicwave 2200. Speedway SW320 watercooled torch.

#19 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 07:32 PM

GTR front pipes. Just a quick Mild steel in out job.




Attached File  21042009358.jpg   432.99K   130 downloads
Attached File  21042009354.jpg   475.86K   124 downloads
Attached File  21042009355.jpg   461.6K   112 downloads
Attached File  21042009356.jpg   555.09K   113 downloads
Attached File  21042009357.jpg   524.18K   124 downloads

#20 SHOWFA

  • Joined:10-August 08
  • Location:Australia SA
  • Car:Type X, JZZ30

Posted 28 February 2011 - 07:45 PM

wow gd fab work mate

#21 skd-570

  • Joined:12-September 09
  • Location:Australia SA
  • Car:sr20det onevia

Posted 28 February 2011 - 07:45 PM

awsome work man. your skills are so good!

makes me really motivated to learn how to do it well.

keep up the awsome work! :thumbsup:

#22 TRIPOD

  • Joined:14-September 05
  • Location:Australia TAS
  • Car:CEFIRO, LAUREL

Posted 28 February 2011 - 08:05 PM

bloody awesome work man, nice looking welds on the sump! love to be able to do stuff like that

#23 mitch bucannon

  • Joined:22-February 06
  • Location:Australia NSW

Posted 28 February 2011 - 08:09 PM

Thanks heaps guys, i really appreciate it. ill post up some pics of my car soon.

#24 snwfek

  • Joined:16-June 10
  • Location:Australia VIC

Posted 28 February 2011 - 08:22 PM

really top work :)
im loving this thread

#25 blaq-boi

  • Joined:27-January 05
  • Location:Australia VIC

Posted 01 March 2011 - 10:25 AM

epic skillz! where do you work?

#26 djhatzigiannis

  • Joined:11-October 08
  • Location:Australia VIC
  • Car:s13

Posted 01 March 2011 - 11:54 AM

nice work mate keep posting!

#27 WANT3D

  • Joined:16-June 09
  • Car:Spec R Silvia

Posted 01 March 2011 - 12:16 PM

Wow! You sir are a legend!

#28 driftmatt

  • Joined:20-September 09
  • Location:Australia NSW
  • Car:S13

Posted 01 March 2011 - 12:40 PM

Talented much!

Sick work dude, looks like you really no what your doing!




#29 STR8E180

  • Joined:30-April 03
  • Location:Australia NSW
  • Car:GTR R34 V-SPEC

Posted 01 March 2011 - 01:46 PM

View Postblaq-boi, on 01 March 2011 - 10:25 AM, said:

epic skillz! where do you work?
He works at hypertune i just found out like 5 mins ago when I went there to buy some materials for my brothers GTR project
Nice meeting you today Mich didn't expect to run into you

#30 essare

  • Joined:02-August 10
  • Location:Australia SA
  • Car:s13, 1JZ MX83

Posted 01 March 2011 - 02:18 PM

i wish i could weld like that.





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

Common Links

  • About Us
  • Privacy Policy
  • User Agreement
  • Help & Support Forums
  • Advertise
  •  

    By your continued use of this site, you agree to follow all Rules & Guidelines and abide by the User Agreement outlined in our Terms & Conditions.

    Hardtuned Network is hosted by Sanity Technology

    Design, Site Management & Hotness provided by Loz.

    Big thanks to all our members and volunteers for making this network what it is today!