Warning: Illegal string offset 'html' in /home/nissansi/public_html/forums/cache/skin_cache/cacheid_1/skin_topic.php on line 907
The Maroon Menace. 455kw monsta! - Hardtuned.net - Page 16

Jump to content


The Maroon Menace. 455kw monsta! Silvia

DRE20 S14a KOUKI sr22det 310kw Precision 5858 Z32 Nismo
479 replies to this topic

#451 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 12 August 2015 - 09:54 AM

Hahahaha thanks man, I might do it on the weekend.. Its been really pissing me off too don't worry. I might even leave it off but undecided yet.

#452 -Gaz-

  • Joined:18-June 06
  • Location:Australia SA
  • Car:CBR, S14

Posted 12 August 2015 - 05:51 PM

455rwkw....

Jesus christ. Those are some serious numbers. Impressive. Cop that V8 lovers.

#453 -Gaz-

  • Joined:18-June 06
  • Location:Australia SA
  • Car:CBR, S14

Posted 12 August 2015 - 05:56 PM

From say 200kw to just below 400, the graph goes straight UP..so fucking impressed mate. Kudos. Big time.

#454 Major

  • Joined:27-July 14
  • Location:Australia VIC
  • Car:s14 s2

Posted 13 August 2015 - 09:34 AM

Wow very impressive numbers from the sr! Need a skid vid ;)

#455 SRS13

  • Joined:10-April 04
  • Location:Australia NSW

Posted 13 August 2015 - 02:53 PM

Good numbers man. Impressed with the GTX3852. What boost was that on?

#456 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 14 August 2015 - 06:47 AM

Yeah its a fairly staunch turbo, that's on around 36psi with about 15 degrees in it up top, only has e77 in it as well, couldn't get it to e85 as much as we tried due to the amount of 98 that was still in the tank. But I have a plan for that drama.

#457 robbo_rb180

  • Joined:26-August 08
  • Location:Australia QLD
  • Car:sil80 & s14

Posted 14 August 2015 - 08:01 AM

:thumb: great result
going to take it to the track or bring it to brissy for powercruise?

#458 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 15 August 2015 - 09:28 AM

Once I get a trailer I will yeah for sure :D

#459 SRS13

  • Joined:10-April 04
  • Location:Australia NSW

Posted 18 August 2015 - 08:42 PM

Thats a decent amount of boost. Where are the vids?

#460 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 19 August 2015 - 01:05 PM

Vids r on my fb. When I get around to it ill put it up on my youtube account.

#461 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 28 August 2015 - 07:12 AM

Soooo, I kinda been eyeing these plates off since I got the motor rebuilt the first time back in 2012, finally got around to gettin em. Looks good I think :D

Attached Thumbnails

  • Attached Image: WP_20150827_12_20_43_Pro.jpg


#462 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 26 September 2015 - 10:35 PM

Attached Image: 11992280_10153269582309585_1104498189_n.jpg

Attached Image: 11992647_10153269581559585_1920335756_n.jpg

Attached Image: 11994239_10153269581099585_1935500268_n.jpg

Dem welds :wub: :wub: :wub:
Attached Image: 11998791_10153269581809585_1799466076_n.jpg

#463 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 26 September 2015 - 10:39 PM

Attached Image: 5.jpg

my boys new weapon :thumb:
Attached Image: 11224459_10205478828875743_5554604289274483673_n.jpg

Edited by DRE20, 26 September 2015 - 10:39 PM.


#464 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 29 March 2016 - 09:26 PM

Major update:


So after the paint job back in 2014 i have had the shits with the paint. Long story short but old mate who painted it never got around to finishing off buffing it, so me and my mate did it over the weekend,

First we claybarred it, then cut it back to correct the swirls that were in it from the painter guy who never ended up fixing the swirls, and tried to get rid of all the water marks that have accumulated on it since being painted (rain and tree sap and other general junk thats accumulated on the paint). Then we buffed it again but with a polish. Then we went over the whole car with paint protection that my mate is about to start selling. The paint protection is similiar to opti-coat or nanocoating etc. Only instead of paying a million dollars for some professional to do it, us pair of professionals did it. Anyways here's the result so you decide if u like the end result or not and leave a comment! Id love to hear your feedback!


Attached Image: 941062_10206580992749151_3464839764516403036_n.jpg

Attached Image: 12189626_10206580992189137_709569049414542627_n.jpg

Attached Image: 12801678_10206580993069159_8933724007807685205_n.jpg

Attached Image: 12920544_10206580993469169_6719817086434089055_n.jpg

Attached Image: 12472322_10206580993789177_3047861487123120433_n.jpg

#465 Scotties15

  • Joined:08-May 05
  • Location:Australia QLD
  • Car:S15 200sx

Posted 30 March 2016 - 06:18 AM

looks good mate.
its amazing what a good machine polish does hey! whats the paint protection stuff called your mates selling?

#466 sleepr

  • Joined:30-December 06
  • Location:Australia SA
  • Car:s15

Posted 31 March 2016 - 10:34 AM

Looks perfect in the pics, good work DRE. How's the rig holding up mechanically?
And yes any info on the paint protection product?

#467 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 13 May 2016 - 11:45 AM

Minor update.

Z32 rear housing decided to break. Un farking lucky.

Pics for proof!

I guess all them times I smacked 3rd fairly hard finally paid off lmao

#468 Scotties15

  • Joined:08-May 05
  • Location:Australia QLD
  • Car:S15 200sx

Posted 13 May 2016 - 12:48 PM

View PostDRE20, on 13 May 2016 - 11:45 AM, said:

Minor update.

Z32 rear housing decided to break. Un farking lucky.

Pics for proof!

I guess all them times I smacked 3rd fairly hard finally paid off lmao

Pics no work bro.
or ya didnt upload them ya jew ! :P

time for a z33 and get a 6 speed in it.

#469 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 14 May 2016 - 09:22 AM

I tried to log into this shit site on the computer it wouldn't let me so I tried to reset my password im still waiting for the 3 emails lol junkest site.

And can't upload photos from my s6. Wtf is wrong with this place it used to be cool.

Anyways I've broken the rear housing where it mounts to the gear shifter arrangement... if i remember later when im at home ill upload pics. Wouldnt mind a z33 box but then I'd have too many gears to change while dragging mofos lol

#470 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 14 May 2016 - 09:29 AM

And my mate still hasn't created a name for this paint protection stuff yet lol what a show

#471 robbo_rb180

  • Joined:26-August 08
  • Location:Australia QLD
  • Car:sil80 & s14

Posted 14 May 2016 - 09:57 AM

time for a sequential upgrade.......http://www.ttindustries.com/car_index.html

#472 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 14 May 2016 - 11:55 AM

alright some pics:




Attached Image: gearbox1.jpg

closeup:
Attached Image: gearbox2.jpg

#473 Dose Pipe Sutututu

  • Joined:19-January 05
  • Location:Australia NSW
  • Car:Boat Sutututuutu

Posted 15 July 2016 - 11:05 AM

blame Loz.. that tight arse

#474 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 23 September 2016 - 08:43 AM

Hey all.

Haven't posted for a while been busy gettin car smicko ready for powercruise which was 2 weeks ago now. Anyways so I loaded the rig up and drove 2500km to brissy powercruise and back. Had a couple dramas before hand like one of the pumps in the holley dominator failed due to a filter being blocked and then one of the straps on the clutch snapped so had to go get a new clutch and fit it while I was i brisbane (yes I pulled and installed new clutch myself on a mates hoist) Huuuuuge thanks to Jason Gallagher mechanical services for the use of his hoist he saves my ass.

Other then that powercruise was a success. Had the tune checked and a little bit of boost wound down and made stable before I went coz i wasnt sure how things went at pc and want it to last so went there with only 32psi in it 😂😂😂 and that was plenty to have fun in as you will see in the video.



Until next time catch you 🖖😆

#475 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 23 September 2016 - 08:50 AM

View Postsleepr, on 31 March 2016 - 10:34 AM, said:

Looks perfect in the pics, good work DRE. How's the rig holding up mechanically?
And yes any info on the paint protection product?

So my mate has released a brand. Its called "Black Hawk Car Care" and can be contacted through Facebook. He sells DIY kits so for guys like myself who can buff a little bit and Polish a panel etc this is the kit u want. Its awesome. I've done both my cars and the water bead is insane haha. Still to this day. And so God dam shineyyyyyy 👌


http://www.blackhawkcarcare.com/

Edited by DRE20, 01 October 2016 - 10:01 AM.


#476 Judas

  • Joined:20-April 06
  • Location:Australia VIC
  • Car:S1 - S14

Posted 23 September 2016 - 03:10 PM

I'll race ya














on foot.

#477 robbo_rb180

  • Joined:26-August 08
  • Location:Australia QLD
  • Car:sil80 & s14

Posted 23 September 2016 - 04:09 PM

:lol: sweet 360 you did around the 17minute mark

sucks about the issues pre powercruise, how did you find the event?

#478 Sparky_S13

  • Joined:26-August 16
  • Location:UK / England
  • Car:200sx s14a

Posted 23 September 2016 - 04:46 PM

This is awesome!

Same colour as my old one which was also SR22 but stroker as opposed to sleeved, oh and only a baby 290kw at 22psi compared to yours lol

And the colour is Damson so needs to be renamed to Damson Devil or similar :P

#479 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 23 September 2016 - 10:39 PM

View Postrobbo_rb180, on 23 September 2016 - 04:09 PM, said:

Posted Image sweet 360 you did around the 17minute mark

sucks about the issues pre powercruise, how did you find the event?


i reckon they have got that whole setup pretty well sorted hey, its got everything, skids, drifting, powerskids, cruising, show and shine, dyno comp, food, atm machines, couldn't really fault it besides the weather but rain just equals fun lol, and i've never really drifted before as i'm not a fan of gutters so basically what you see in the vid is me sort of just getting my head around how the car is going to react, i mean its clearly not setup for drifting as 3rd cog is abit too loose but second was definitely heaps of fun hahaha

I only got to do 1 day of powercruise as the friday i had to get tyres cos i couldnt get the ones i wanted in townsville due to no stock so had to piss fart around working out where to go to get em so we just cruised around brissy boostin it up, i probably enjoyed that more then powercruise to be honest but thats just personal preference really, i think ill try go back to PC next year but theres a few things i need to still sort out on the car before im proper happy with it so ill plug away at it in the next 12 months and try make it down there again and hopefully i can attend for 3 days straight of getting chopped :P

#480 DRE20

  • Joined:22-June 10
  • Location:Australia QLD
  • Car:97 s14a

Posted 23 September 2016 - 10:41 PM

View PostSparky_S13, on 23 September 2016 - 04:46 PM, said:

This is awesome!

Same colour as my old one which was also SR22 but stroker as opposed to sleeved, oh and only a baby 290kw at 22psi compared to yours lol

And the colour is Damson so needs to be renamed to Damson Devil or similar Posted Image


i was under the impression the colour was always called "Shiraz" like the wine. LS1 is the paint code (kind of ironic hey? LOL)





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

Common Links

  • About Us
  • Privacy Policy
  • User Agreement
  • Help & Support Forums
  • Advertise
  •  

    By your continued use of this site, you agree to follow all Rules & Guidelines and abide by the User Agreement outlined in our Terms & Conditions.

    Hardtuned Network is hosted by Sanity Technology

    Design, Site Management & Hotness provided by Loz.

    Big thanks to all our members and volunteers for making this network what it is today!