Warning: Illegal string offset 'html' in /home/nissansi/public_html/forums/cache/skin_cache/cacheid_1/skin_topic.php on line 907
NISSAN FAST Thread (Thread Now Closed) - Hardtuned.net - Page 2

Jump to content


NISSAN FAST Thread (Thread Now Closed) 

405 replies to this topic

#31 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 18 September 2010 - 12:08 AM

View PostAWD2.0T, on 17 September 2010 - 10:22 PM, said:


After the part number for the left front ABS sensor assembly - (lead from sender to wheel, I believe?)
Is this the same as the Aussie Model?

Also require spec's / demensions on the Fuel Pump & part number. (As want to upgrade in-tank pump, with minimal mods).

Keep up the great work!

Cheers,
Sean

U13 SR20DET Front Left ABS Sensor - 47911-0E000

No idea if it is the same as Aus spec (my copy of FAST doesn't do Aus vehicles), but it might be, best to ask Nissan Spares (they have Aus FAST).

Fuel Pump - 17040-0E600

Can't help with dimensions either sorry, FAST doesn't go into that much detail on the parts.

#32 AWD2.0T

  • Joined:11-April 05
  • Location:Australia VIC

Posted 21 September 2010 - 07:12 PM

View PostSIR ASHMAN, on 18 September 2010 - 12:08 AM, said:

View PostAWD2.0T, on 17 September 2010 - 10:22 PM, said:


After the part number for the left front ABS sensor assembly - (lead from sender to wheel, I believe?)
Is this the same as the Aussie Model?

Also require spec's / demensions on the Fuel Pump & part number. (As want to upgrade in-tank pump, with minimal mods).

Keep up the great work!

Cheers,
Sean

U13 SR20DET Front Left ABS Sensor - 47911-0E000

No idea if it is the same as Aus spec (my copy of FAST doesn't do Aus vehicles), but it might be, best to ask Nissan Spares (they have Aus FAST).

Fuel Pump - 17040-0E600

Can't help with dimensions either sorry, FAST doesn't go into that much detail on the parts.

Thanks for that!
Cheers

#33 D_K

  • Joined:23-January 10
  • Location:Australia ACT
  • Car:91 180sx

Posted 28 September 2010 - 10:11 AM

Howdy,

Looking for the part numbers for the front and rear thermostat housing for 1991 redtop SR20DET

mine has corroded through

Attached Image: DSCF2333.JPG

Many thanks

#34 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 28 September 2010 - 11:05 AM

View PostD_K, on 28 September 2010 - 10:11 AM, said:

Looking for the part numbers for the front and rear thermostat housing for 1991 redtop SR20DET

Rear Housing - 11061-52F05
Front Housing - 13049-52F00

#35 Omae Aho Ka

  • Joined:23-April 07
  • Location:Australia QLD
  • Car:180SX

Posted 28 September 2010 - 11:35 PM

Hi :)
Looking for part numbers for the plastic tabs/screws (whatever they actually are) that hold both kick panels (ECU - passenger & Fusebox - driver) in place for a s13/180.

Mine seem to be missing them and rattle a lot whenever I hit any bump in the road.

I wonder if I can get these through Nissan or supercheap etc? :S

Cheers

#36 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 29 September 2010 - 12:34 AM

^^ Kickpanel screws are 08510-61697

They just look like a very large woodscrew. You could probably find something pretty close at Bunnings.

#37 Slow33

  • Joined:07-November 03
  • Location:Australia ACT
  • Car:R32

Posted 02 October 2010 - 12:08 AM

Hi,

Could I please get the part numbers for window seals, door seals and trims (that go around the top of the drivers and passengers windows) and boot seal - when you get a chance?
Suit HCR32 R32 GTSt (BNR32 GTR should be the same)

Thanks heaps :)

#38 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 02 October 2010 - 12:10 AM

I'll need the year it was manufactured.

And this is a 2 door right?

#39 Slow33

  • Joined:07-November 03
  • Location:Australia ACT
  • Car:R32

Posted 02 October 2010 - 12:22 AM

Hi, sorry, it is 1990 and yes, a 2 door

Thanks again

#40 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 02 October 2010 - 01:24 AM

I think these are correct.

Boot seal - 84830-04U00
Window Seal (LH)- 76861-04U01
Window Seal (RH)- 76860-04U01
Door Seal (LH) - 80831-04U10
Door Seal (RH) - 80830-04U10

The trim I can not find, it doesn't also hold the window seal in does it, because there is a listing for the window seal retainers.

#41 Slow33

  • Joined:07-November 03
  • Location:Australia ACT
  • Car:R32

Posted 02 October 2010 - 10:06 AM

Hi. Yes it is a retaining type thing for the seals, cheers

Would you also be able to get the numbers for the front and rear window seals and perhaps rear 1/4 window seals too?

Thanks again for your help, really useful, cheers

#42 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 02 October 2010 - 05:25 PM

Front Window Seal Retainer (LH) - 76871-04U00
Front Window Seal Retainer (RH) - 76870-04U00

From my experience with S13's (which appears to be the same for the R32) there are no seals for the front/rear windscreens as such. They are glued in place and then these pieces of rubber moulding are pressed into grooves around the window and then it is covered by a piece of trim.

The quarter windows are completely glued on. And then covered with trim - no rubber mouldings.

The moulding for the rear windscreen is:

79780-04U10 for vehicles 05/89-10/90
79870-04U15 for vehicles 10/90- on

The moulding for the front windscreen is:

72725-04U10

#43 Slow33

  • Joined:07-November 03
  • Location:Australia ACT
  • Car:R32

Posted 02 October 2010 - 07:19 PM

Thanks again, I don't suppose you know how to tell if it is pre/post Oct '90 do you?

Cheers

#44 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 02 October 2010 - 07:54 PM

PM me the Japanese Vin number.

It will be on the Japanese build plate in the engine bay and will be in the format R32 XXX XXX (or HRC32 XXX XXX, etc). Basically you are looking for the vehicle model code followed by 6 numbers.

I can run that through FAST and find out exactly when it was built.

#45 Slow33

  • Joined:07-November 03
  • Location:Australia ACT
  • Car:R32

Posted 02 October 2010 - 08:20 PM

Pm sent - cheers

#46 CalebS15

  • Joined:26-December 08
  • Location:Australia NSW
  • Car:JDM Spec R

Posted 05 October 2010 - 04:46 PM

If you could please confirm the part number for the rear wheel studs for a 99 jdm S15 that would be much appreciated

#47 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 05 October 2010 - 05:17 PM

^^ Nissan do not sell the studs separately, they sell the hub as a unit which includes the studs.

#48 CalebS15

  • Joined:26-December 08
  • Location:Australia NSW
  • Car:JDM Spec R

Posted 05 October 2010 - 08:25 PM

Damn, i was under the impression i could buy them seperately. Thank you for your help anyway

#49 OLDATO

  • Joined:16-September 05
  • Location:Australia NSW
  • Car:Datsun Stanza, 180sx SR20DET, Datsun Stanza Coupe

Posted 12 October 2010 - 03:50 PM

I have a challenge for you ...

I need the part number for a 1979 Datsun Stanza 2 Door Coupe, KPA10 - Passenger side, rear quater vent window glass (one that can be 'popped' open from the back seat)

:ph34r:

#50 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 12 October 2010 - 04:44 PM

FAST has no listings for the A10.

Sorry.

#51 OLDATO

  • Joined:16-September 05
  • Location:Australia NSW
  • Car:Datsun Stanza, 180sx SR20DET, Datsun Stanza Coupe

Posted 12 October 2010 - 06:53 PM

Ahh damnit .. where would i get such a listing ??

#52 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 12 October 2010 - 09:41 PM

Sorry I should have said, my copy of FAST has no listings for the A10.

You would have to try Nissan directly. If Nissan is still supporting that vehicle with spare parts then their copy of FAST will have the listing.

#53 Turbo 180sx

  • Joined:17-April 04
  • Location:Australia NSW

Posted 15 October 2010 - 10:36 PM

s13 sr20det manual shifter circlip?

thanks!

#54 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 15 October 2010 - 11:48 PM

View Postjuice sx, on 15 October 2010 - 10:36 PM, said:

s13 sr20det manual shifter circlip?

thanks!

As in the ones that hold the shifter into the gearbox?

There are 2 of those.

32204-V5004 - Upper
32204-V5003 - Lower

#55 Turbo 180sx

  • Joined:17-April 04
  • Location:Australia NSW

Posted 17 October 2010 - 01:20 PM

hmm thanks thats what i got here but they seem to be different sizes

#56 Kal

  • Joined:28-September 07
  • Location:Australia QLD
  • Car:S13, 89

Posted 29 October 2010 - 08:11 AM

Could i get the part numbers of the 4 bolt Half Shafts from the S13 SR20DeT R200 diff please mate :)

Edited by Kalman, 29 October 2010 - 08:16 AM.


#57 SIR ASHMAN

  • Joined:22-November 06
  • Location:Australia QLD
  • Car:CA18DET S13

Posted 29 October 2010 - 12:21 PM

View PostKalman, on 29 October 2010 - 08:11 AM, said:

Could i get the part numbers of the 4 bolt Half Shafts from the S13 SR20DeT R200 diff please mate :)

There are no 4 bolt half shafts, they come in either 5 or 6 bolt.

I can get the part numbers if you want, but I recommend buying them off Yahoo Japan rather than trying to buy new through Nissan, they will be cheaper.

Here's some 5 bolts I found:
http://www.importmon...0180SXS14S15R32

Contact Streeter if you want to buy them.
dartsun75@gmail.com

#58 Kal

  • Joined:28-September 07
  • Location:Australia QLD
  • Car:S13, 89

Posted 29 October 2010 - 01:24 PM

That site is brilliant. Thanks mate

#59 datsun180

  • Joined:01-October 06
  • Location:Australia NSW
  • Car:180sx

Posted 30 October 2010 - 09:28 PM

Hi, I'm after these part numbesr for the A/C system......180sx 1992 sr20det. I'm after the "TX valve" near the exchanger under the dash, ( its a little pressure valve ) the filter/dryer ( pad type ) up front at the bumper and also new stock or nismo front strut tops please?

#60 datsun180

  • Joined:01-October 06
  • Location:Australia NSW
  • Car:180sx

Posted 30 October 2010 - 09:29 PM

View PostKalman, on 29 October 2010 - 01:24 PM, said:

That site is brilliant. Thanks mate

when you use import munster go to the original yahoo page sent that to jessy streeter and save heaps of cash :thumbsup:





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

Common Links

  • About Us
  • Privacy Policy
  • User Agreement
  • Help & Support Forums
  • Advertise
  •  

    By your continued use of this site, you agree to follow all Rules & Guidelines and abide by the User Agreement outlined in our Terms & Conditions.

    Hardtuned Network is hosted by Sanity Technology

    Design, Site Management & Hotness provided by Loz.

    Big thanks to all our members and volunteers for making this network what it is today!