Warning: Illegal string offset 'html' in /home/nissansi/public_html/forums/cache/skin_cache/cacheid_1/skin_topic.php on line 907
Ultimate Turbo Reference guide for Nissans. - Hardtuned.net - Page 2

Jump to content


Ultimate Turbo Reference guide for Nissans. 

464 replies to this topic

#31 netrat

  • Joined:21-July 05
  • Car:S14 Zenki

Posted 17 January 2007 - 02:50 PM

Make and model: Nissan Silvia S14
Size of engine: 1998cc
Modifications to the car: Greddy intake manifold, PFC D-Jetro, 740cc injectors, blitz 2-core intercooler, apexi 1.1mm HG
Type of turbo: TD06SH-25G
Trim of turbo: dunno
Rear Exhaust housing: 10cm
When does vehicle begin boost: ~4000rpm
When does vehicle reach full boost and what PSI: ~4800rpm@1.4bar on the street, ~5200rpm on the dyno
Does the vehicle have Cams? yes
What brand: Tomei
What lift/duration etc: 12mm/260
Max power achieve at what boost: 327rwkw@1.4bar

Posted Image

#32 HAYAI

  • Joined:27-April 03
  • Location:Australia WA
  • Car:JZX100 Chaser , 1JZ-GTE VVT-I

Posted 02 February 2007 - 12:09 PM

Make and model:S13 93
Size of engine:SR20 (slight bore increase)
Modifications to the car: Almost everything
Type of turbo: Garrett GT30R
Trim of turbo:52
Rear Exhaust housing:.64
When does vehicle begin boost:3000
When does vehicle reach full boost and what PSI:4100
Does the vehicle have Cams? yes
What brand:JUN
What lift/duration etc: 264/272 11.5
Max power achieve at what boost: 350rwhp 21psi 550nm torque

#33 Hawker180

  • Joined:26-June 05
  • Location:Australia VIC
  • Car:180sx + Landcruiser

Posted 06 February 2007 - 08:42 AM

Make and model: 1991 Nissan 180SX
Size of engine: SR20DET 2.0 litre
Modifications to the car: Greddy spec M front mount cooler, 3" exhaust (high flow cat), Nismo 555cc Injectors, nippo denso fuel pump, Power FC, Z32 AFM with HKS pod and custom stainless 3" intake pipe.
Type of turbo: HKS GT-SS
Trim of turbo: dunno
Rear Exhaust housing: dunno
When does vehicle begin boost: before 3000rpm
When does vehicle reach full boost and what PSI: (not sure - will update)
Does the vehicle have Cams? if so; yes (STOCK)
Max power achieve at what boost: 200rwkw @ 14psi (low boost)...can run 1.1 bar through it but haven't bothered yet

Attached Thumbnails

  • Attached Image: Hawker05_SR180sx_Dyno_GTSS.jpg


#34 mado32

  • Joined:13-September 06
  • Car:R32 Skyline

Posted 19 February 2007 - 05:26 PM

Make and model:HCR32
Size of engine:2.0ltr
Modifications to the car:manifold, gtr fmic, plenum, 90mm t/b 550cc jectors,ss zorst, pfc, z32 afm,
Type of turbo: Garrett3540
Trim of turbo:
Rear Exhaust housing:.64
When does vehicle begin boost:
When does vehicle reach full boost and what PSI:4400 @ 1.2
Does the vehicle have Cams? if so;
What brand:
What lift/duration etc:
Max power achieve at what boost: 240rwkw @ 1.2

#35 changaz

  • Joined:04-May 03
  • Location:Australia QLD
  • Car:1997 s14a 200sx

Posted 05 March 2007 - 09:33 AM

Make and model: s14a 200sx
Size of engine: sr20det
Modifications to the car: hks 256/264 cams, power fc, exhaust, fmic, ebc, 740cc nismo's, z32afm etc
Type of turbo: gt2871r
Trim of turbo: 56
Rear Exhaust housing:0.64
When does vehicle begin boost:2000-2500rpm
When does vehicle reach full boost and what PSI: 3800 - 4000rpm
Does the vehicle have Cams? if so;
What brand: hks
What lift/duration etc: 256/264
Max power achieve at what boost: 335rwhp ~ 251rwkw @ 18psi

#36 HyperGear

  • Joined:28-February 06
  • Location:Australia VIC
  • Car:180SX, S14, S15, R33, R33, 300ZX

Posted 17 March 2007 - 11:44 PM

Make and model:S13
Size of engine:1.8ltr CA18det
Modifications to the car:manifold, fmic, 263.8.9 Cams, 700cc jectors, 3inch turbo back.
Type of turbo: HyperGears TR44
Rear Exhaust housing:.63
When does vehicle begin boost:3000
When does vehicle reach full boost and what PSI:5000
Does the vehicle have Cams? yes
What brand: Stock
What lift/duration etc: 263 by 8.9
Max power achieve at what boost: 261KWs @ 22PSI

Posted Image
Video shotout

#37 HyperGear

  • Joined:28-February 06
  • Location:Australia VIC
  • Car:180SX, S14, S15, R33, R33, 300ZX

Posted 17 March 2007 - 11:46 PM

Make and model:S13
Size of engine:1.8ltr CA18det
Modifications to the car:manifold, fmic, 263.8.9 Cams, 700cc jectors, 3inch turbo back.
Type of turbo: HyperGears TR43
Rear Exhaust housing:.48
When does vehicle begin boost:2800
When does vehicle reach full boost and what PSI:4600
Does the vehicle have Cams? yes
What brand: Stock
What lift/duration etc: 263 by 8.9
Max power achieve at what boost: 230KWs @ 19PSI

Posted Image

#38 PJ's Quick Bits

  • Joined:03-April 05
  • Location:Australia NSW
  • Car:S13 Silvia

Posted 21 March 2007 - 08:43 PM

Make and model: S13 Silvia
Size of engine:SR 2.0
Modifications to the car:Tomei 256 Poncams, Tomei Forged pistons, stock crank and rods, Haltech E8
Type of turbo: Trust T88-34D
Trim of turbo:
Rear Exhaust housing: 22cm
When does vehicle begin boost:5000
When does vehicle reach full boost and what PSI:6000 21psi/26psi/29psi
Does the vehicle have Cams? yes
What brand: Tomei
What lift/duration etc:256 Poncams

Max power achieve at what boost: 422hp (314.5kw) / 481hp (360kw) / 519hp (385kw)

#39 GTS33K

  • Joined:08-December 02
  • Location:Australia NSW
  • Car:Nissan Silvia S13

Posted 26 March 2007 - 06:41 PM

Make and model: S13 180SX
Size of engine: CA18DET
Modifications to the car: FMIC, 3" Exhaust, BOV, Pod Filter
Type of turbo: GT2560R
Trim of turbo: 60
Rear Exhaust housing: .64
When does vehicle begin boost: 2500RPM
When does vehicle reach full boost and what PSI: 4000RPM
Does the vehicle have Cams? No
What brand: N/A
What lift/duration etc: N/A
Max power achieve at what boost: 127.9 @ 9psi, 163.7 @ 19psi

#40 BPROOF

  • Joined:30-March 07
  • Car:s15

Posted 30 March 2007 - 08:07 AM

Make and model: S15
Size of engine:2.0
Modifications to the car: Everything But ..... Internals
Type of turbo: Trust T518Z
Trim of turbo: 8cm
Rear Exhaust housing:
When does vehicle begin boost:2500
When does vehicle reach full boost and what PSI:4000 21psi
Does the vehicle have Cams? yes
What brand: Tomei Poncams
What lift/duration etc: 256 In&Ex

Max power achieve at what boost:

270Kws@21psi 650Nm@4000rpm
325Kws@21psi 850Nm@4000rpm With NOS

Edited by BPROOF, 30 March 2007 - 08:11 AM.


#41 pssiii

  • Joined:05-December 04
  • Location:Australia SA
  • Car:s14

Posted 11 April 2007 - 10:02 AM

Make and model: R32 Skyline
Size of engine: RB26/30
Modifications to the car: GTR IC, 580cc Inj, 44mm w/g, 044,microtech, split pulse stainless top mount manifold, 3.5" exh
Type of turbo: T70
Trim of turbo:
Rear Exhaust housing: .86
When does vehicle begin boost: 2000rpm
When does vehicle reach full boost and what PSI: 3000rpm @ 15psi
Does the vehicle have Cams? GTR
What brand: nissan
What lift/duration etc: 8.5mm 255
Max power achieve at what boost: 400rwhp @ 7000rpm 15psi

This has a very broad power range, it is running minimum boost allowed by external wastegate(14.7psi spring)

This is a very reliable combo especially for drift and could easily make 450-470rwhp @ 20psi with boost controller/re-tune.

I guess its not bad for bush bearing! dont believe the hype, they are alot cheaper, do a great job most Trust turbos are bush,

just make sure you get a good tune. I think thats where alot of bad stories come from!

#42 STR8E180

  • Joined:30-April 03
  • Location:Australia NSW
  • Car:GTR R34 V-SPEC

Posted 25 April 2007 - 10:27 PM

Make and model: 94 S13 180SX
Size of engine: SR20DET 2.0L
Modifications to the car: FMIC, custom plenum,custom steam pipe hi-mount manifold turbo back exhaust, Garret GT3076R ext gate,tial 44mm gate,tomei PROcams,HKS cam gears, sard 850cc,044,rising fpr, avcr, d jetro,
Type of turbo: garret gt3076R
Trim of turbo: 56trim a/r .60
Rear Exhaust housing: .63
When does vehicle begin boost: 1500rpm
When does vehicle reach full boost and what PSI: 4200rpm 26psi
Does the vehicle have Cams? if so; yes
What brand: Tomei procams
What lift/duration etc: 12.5mm 270/270
Max power achieve at what boost: 305rwkw@26psi,
Posted Image

#43 headlock

  • Joined:19-January 05
  • Location:Australia SA
  • Car:Evolution IX

Posted 27 April 2007 - 05:54 PM

Make and model: 98 S14a 200sx
Size of engine: SR20DET 2.0L
Modifications to the car: Power FC, Walbro, 550cc Inj, Full 3" Zorst, Cooler piping 2.5", FMIC, pod, catch can, turbotech mbc
Type of turbo: Garrett GT2871R
Trim of turbo: 52Trim A/R 60
Rear Exhaust housing: .64
When does vehicle begin boost: 1500~rpm
When does vehicle reach full boost and what PSI: 3700~rpm 1.3bar
Does the vehicle have Cams? Yes - HKS Step 1 256 / 264 duration 10.5mm / 10mm lift

240.3rwkw @ 18psi

Posted Image

#44 STR8E180

  • Joined:30-April 03
  • Location:Australia NSW
  • Car:GTR R34 V-SPEC

Posted 03 May 2007 - 01:05 AM

View PostSeaNo180, on Oct 14 2006, 07:06 AM, said:

This thread is for references only, so can people please post up their mods and what power they are making with their aftermarket turbo's. we dont' need any posts with standard turbo's.

View PostSeaNo180, on Oct 14 2006, 07:06 AM, said:

There is to be no discussion, this is a reference thread only. if you want to ask any questions please pm the member. any discussion will be deleted.

*THREAD CLEANED*

please read the 1st post made by SeaNo180 it clearly states:
1. we dont' need any posts with standard turbo's
2.There is to be no discussion

#45 ca1via

  • Joined:14-September 04
  • Location:Australia ACT
  • Car:R32 Gtr

Posted 06 May 2007 - 06:03 PM

Make and model: 1990 onevia
Size of engine: ca18det
Modifications to the car:
GT28rs, 38m External Gate, 720cc injectors, 600x300 fmic, 044 fuel pump, dr drift remap, z32 afm, 3" turbo back zorst, ss manifold, pod filter, forged pistons, O ringed block, balanced & blue printed, race prepped rods & crank, 1.5mm metal head gasket, ported head, bov, turbotech boost controller, malpassi fuel reg, lightened flywheel, exedy clutch,
Type of turbo: gt28rs
Trim of turbo: ? a/r 0.7
Rear Exhaust housing: 0.86
When does vehicle begin boost: 2250
When does vehicle reach full boost and what PSI: 3900 @ 14psi
Does the vehicle have Cams? if so; No
What brand:
What lift/duration etc:
Max power achieve at what boost: 171rwkw @ 14psi @ 156 km/ph
Max Torque: = 481N.M @ 124 km/ph

(were not able to tune past 14 psi due to faulty coolant temp and knock sensors)

Have since purchased a custom plenum, xf throttle body, 600x300x100 fmic, valve springs, cams & cams gears, 48mm turbosmart progate, high mount manifold and a t70 turbo.

#46 xris

  • Joined:05-November 02
  • Location:Australia VIC

Posted 15 May 2007 - 11:20 AM

Make and model: 1990 180SX
Size of engine: ca18det
Modifications to the car: Everything possible, bottom and top end
Type of turbo: TD06H-20G
Trim of turbo: 20g
Rear Exhaust housing: 8cm
When does vehicle begin boost: 3500
When does vehicle reach full boost and what PSI: 4000
Does the vehicle have Cams? Yes
What brand: Tomei
What lift/duration etc: 270x9.25mm
Max power achieve at what boost: 228.3kw@19psi
Max Torque: = 600nm

Turbo has been rebuilt and is now performing well.

Posted Image

#47 5USP3CT

  • Joined:11-April 05
  • Location:Australia WA
  • Car:97 Mistubishi Triton Duelcab

Posted 17 May 2007 - 06:28 PM

Make and model: Nissan 180SX
Size of engine: SR20DET (2 Litre)
Modifications to the car: GT2876R, Tial 44m External Gate, 850cc injectors, front mount, 040 fuel pump, EMS Stinger ECU, tomei rocker stoppers, HKS Cams
Type of turbo: GT25/40R (GT25R, GT2876R)
Trim of turbo: 53mm with 62 trim
Rear Exhaust housing: .64
When does vehicle begin boost: 3500RPM
When does vehicle reach full boost and what PSI: 4000RPM and at 18PSI.
Does the vehicle have Cams? HKS step 1 264in (10.5mm) 264ex (10mm)

Car made 327RWHP (243kw) @ 18PSI

#48 Dr_Drift

  • Joined:05-November 02
  • Location:Australia VIC
  • Car:S13 RB25DET, R32 GTS4 RB25DE+T

Posted 28 May 2007 - 09:09 PM

Make and model: CA18DE+T S13 Silvia
Size of engine: 1.8 lt
Modifications to the car:

Std 1.8 Lt CA18DE
2 mm Tomei Metal Head Gasket
3" 3A Racing Pod Filter
New Z32 AFM
Metal Intake Pipe
Trust TD05-16C
450x300x100 FMIC
80mm Billett Throttle Body
CPC Custom Intake Plenum
Removed Intake Butterfiles with Heavily ported intake manifold
Mild Port on Head Intake
264 degree Unknown Lift In/Ex Cams (big lift)
Tomei Cam Gears
Tomei Valve Springs
Mild Port on Head Exhuast
Trust Low Mount Un-Equal Lenth Header Exhaust Manifold
Hypergear 38mm External gate with 4" Screamer pipe.
2.25 into 3" Custom Dump
3" Decat Pipe
3" Cat Back

50mm GKtech GTR Alloy Radiator
550cc Denso Injectors
Sard FPR
Dr Drift Custom Fuel Rail


Type of turbo: Trust TD05-16C
Trim of turbo:
Rear Exhaust housing:
When does vehicle begin boost: 4psi @ 2200rpm
When does vehicle reach full boost and what PSI: 15 psi @ 3300 rpm
Does the vehicle have Cams? if so; Yes
What brand: ???
What lift/duration etc: ???/264In 264EX
Max power achieve at what boost: 215rwkw @ 16psi


Sam

Attached Image: boost.JPG

#49 Precious

  • Joined:23-December 05
  • Location:Australia SA
  • Car:180sx

Posted 28 May 2007 - 10:15 PM

Make and model: Nissan 180sx 1994
Size of engine: sr20det
Modifications to the car: aplex boost controller, haltech E8, aplexi exhaust with 3inch cat, fmic, forged piston, hks metal head gasket, custom mainfold and dump pipe , 650cc Sard injectors, bosh 040 fuel pump, z32afm
Type of turbo: GT2871R
Trim of turbo: 56
Rear Exhaust housing:0.64
When does vehicle begin boost:3000-3500rpm
When does vehicle reach full boost and what PSI: about 4500 - 5500rpm not to sure
Does the vehicle have Cams? if so What brand: no cams
What lift/duration etc: dont know
Max power achieve at what boost: 215rwkw @ 16psi

Attached Image: dyno.jpg

#50 s13_Boostin

  • Joined:21-February 06
  • Location:Australia SA
  • Car:R33 GTS-t

Posted 03 June 2007 - 01:28 PM

Make and model: R33 GTS-T
Size of engine:RB25
Modifications to the car: FMIC, APexi pod, boost controler, bosh fuel pump, 3in turbo back exhaust
Type of turbo: T3
Trim of turbo:-
Rear Exhaust housing:-
When does vehicle begin boost:1500
When does vehicle reach full boost and what PSI:5900rpm at 11.5psi 0.7bar
Does the vehicle have Cams? if so; no cams
What brand:-
What lift/duration etc:-
Max power achieve at what boost:198rwkw at 11.5psi 0.7bar

Edited by s13_Boostin, 03 June 2007 - 01:29 PM.


#51 maiky-s15R

  • Joined:03-August 05
  • Location:Australia SA
  • Car:99 s15 SPEC R

Posted 18 June 2007 - 10:22 PM

Make and model:
Size of engine: 1.8ltr ca18det
Modifications to the car: fmic ,coil pack, fuel pump,breather tank,custome intake pipe
Type of turbo: hks 25/10
Trim of turbo:
Rear Exhaust housing:
When does vehicle begin boost:2500-2800rpm
When does vehicle reach full boost and what PSI:1 bar
Does the vehicle have Cams? if so;
What brand:
What lift/duration etc:
Max power achieve at what boost: 150kwatw at 13psi

#52 benji *RPS13

  • Joined:24-June 07
  • Location:Australia QLD
  • Car:180sx RPS13

Posted 24 June 2007 - 06:51 PM

Make and model:180sx rps13
Size of engine:2.0
Modifications to the car: cooler, fuel pump, fpr, 750cc inj, forgied internals, power fc, z32 brakes,
hks AFM, POD, cool air Induction,
Type of turbo: trust (td0?)
Trim of turbo:
Rear Exhaust housing:
When does vehicle begin boost:3900
When does vehicle reach full boost and what PSI:4500
Does the vehicle have Cams? if so;no
What brand:
What lift/duration etc:?
Max power achieve at what boost:290rwhp @ 18psi

#53 DR1FT HAVEN

  • Joined:08-September 06
  • Location:Australia SA
  • Car:s15-80 s14sr20DET

Posted 26 June 2007 - 06:46 PM

[AD95NT] - 180sx
SR20
GT2871R .64ex housing
both std manifolds
begin boost: 3000rpm
full 20psi @4000rpm
NO cams, just turbo, cooler and management
231rwkw @ around 6000rpm
550Nm torque @ 5000rpm (good substitute for cubic inches)

#54 Guest_HyperGear Turbochargers_*

Posted 05 July 2007 - 01:20 AM

Make and model: Nissan S14
Size of engine: 2L SR20 VVT
Modifications to the car: FMIC, Tomei Cams, Power enterprise 550cc injectors, Bosh 023, Power FC
Type of turbo: HyperGear TR28Kai
Trim of turbo: 55
Rear Exhaust housing: .86
When does vehicle begin boost: 2000RPM
When does vehicle reach full boost and what PSI: 15PSI @ 3200 RPM
Does the vehicle have Cams? Tomei Cams
Max power achieve at what boost: 228.3KWs wheels

Posted Image

#55 LIMIT_TECH_CAR_SHOP

  • Joined:21-January 07
  • Location:Australia VIC

Posted 22 July 2007 - 07:37 AM

Make and model:Silvia S13
Size of engine:1.8ltr CA18det
Modifications to the car: q45AFM, front mount, bl/tz 550cc injectors, walbro pump, e-manage tune, turbo back 3''.
Type of turbo: Hi-mount TR43 with Turbonetics ext'wastegate
Rear Exhaust housing:.48
The vehicle has stock Cams.
Max power achieve at what boost: 200RWKWs @ 1 bar

#56 Guest_HyperGear Turbochargers_*

Posted 23 July 2007 - 01:43 AM

Make and model: Nissan S15Via
Size of engine: CA18det 1.8L
Modifications to the car: FMIC, Tomei Cams, Sard 550cc injectors, Hypergear's 38mm External Gate, Bosh 040, Dr.drift Chip
Type of turbo: HyperGear TR43 Highflow
Trim of turbo: 56
Rear Exhaust housing: .53
When does vehicle begin boost: 2500RPM
When does vehicle reach full boost and what PSI: 22PSI @ 5000RPM
Does the vehicle have Cams? Tomei Cams
What lift/duration etc: 270 by 12.5
Max power achieve at what boost: 267KWs wheels injectors leaned out.

Posted Image

Video showing final tune of 250KWs safe.

#57 Guest_HyperGear Turbochargers_*

Posted 23 July 2007 - 01:53 AM

Make and model: Toyota Crowna
Size of engine: 1JZGTE 2.5L
Modifications to the car: FMIC, Cams, Sard 550cc injectors, Hypergear's 38mm External Gate, Bosh 040, MT10 Microtech ECU, 50 Nos injection.
Type of turbo: HyperGear TR44
Rear Exhaust housing: .63
When does vehicle begin boost: 1700RPM
When does vehicle reach full boost and what PSI: 16PSI @ 2400RPM
Does the vehicle have Cams? Yes Unknow brand
Max power achieve at what boost: 276KWs wheels

Posted Image

Dyno Video

#58 FANTA

  • Joined:21-March 06
  • Location:Australia QLD
  • Car:2001 Black s15 200sx ADM

Posted 23 July 2007 - 07:39 PM

Make and model:2001 ADM s15
Size of engine: SR20DET
Modifications to the car: Manifold, FMIC, Exahust, Intake etc.
Type of turbo: Stock ADM T28
Trim of turbo: Stock
Rear Exhaust housing: Stock
When does vehicle begin boost: Early
When does vehicle reach full boost and what PSI:
Does the vehicle have Cams? if so; No
What brand: NA
What lift/duration etc: NA
Max power achieve at what boost: 240 RWHP at 12psi

Make and model: Ford Laser KE Tx3
Size of engine: BPT 1.8 litre (almost 1.9)
Modifications to the car: Forgies, Flowed Head, PLenum, Manifold, Gate, FMIC, Exahust etc.
Type of turbo: GT2876R
Trim of turbo:
Rear Exhaust housing: .64
When does vehicle begin boost: 2000rpm or less
When does vehicle reach full boost and what PSI: 4000rpm+
Does the vehicle have Cams? if so; No
What brand:NA
What lift/duration etc: NA
Max power achieve at what boost: 320 FWHP at 24psi

Attached Thumbnails

  • Attached Image: Dyno_Graph___320HP_small.JPG


#59 steven13

  • Joined:05-August 05
  • Car:Pulsar n13

Posted 01 August 2007 - 03:22 PM

Make and model: 1990 Nissan Pulsar
Size of engine: ca18det
Modifications to the car: FMIC...Microtech...EBC...550cc injectors...Walbro FP...alot more
Type of turbo: GT2560R/GT28R
Trim of turbo: 60
Rear Exhaust housing: 64
When does vehicle begin boost: 2500
When does vehicle reach full boost and what PSI: 4000....10-16psi
Does the vehicle have Cams? No
What brand:
What lift/duration etc

Max power achieve at what boost: 124kw @ 10psi.... 153kw @16psi

#60 sc s15

  • Joined:28-June 04
  • Location:Australia QLD
  • Car:s13

Posted 10 August 2007 - 07:42 PM

Make and model:2001 ADM s15
Size of engine: SR20DET
Modifications to the car: PFC, Injectors, Manifold, FMIC, Exhaust, Intake
Type of turbo: GT2871R
Trim of turbo: 52T
Rear Exhaust housing: 0.64
When does vehicle begin boost:2000rpm
When does vehicle reach full boost and what PSI: 3700rpm 16.5psi
Does the vehicle have Cams? if so; HKS step 1 256/264
Max power achieve at what boost: 237rwkw @ 16.5psi
Posted Image





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

Common Links

  • About Us
  • Privacy Policy
  • User Agreement
  • Help & Support Forums
  • Advertise
  •  

    By your continued use of this site, you agree to follow all Rules & Guidelines and abide by the User Agreement outlined in our Terms & Conditions.

    Hardtuned Network is hosted by Sanity Technology

    Design, Site Management & Hotness provided by Loz.

    Big thanks to all our members and volunteers for making this network what it is today!