Warning: Illegal string offset 'html' in /home/nissansi/public_html/forums/cache/skin_cache/cacheid_1/skin_topic.php on line 907
FUUARK my 14 - Hardtuned.net

Jump to content


FUUARK my 14 Silvia

fuuark s14 nitto sr20 precision turbo tubs engine wiring dish
32 replies to this topic

#1 Toro Seven

    It doesn't matter if you win by an inch or a mile, winning&#

  • Standard Member
  • Classifieds Items
  • Pip
  • 66 posts
  • Joined:03-November 11
  • Location:Australia NSW
  • Car:97' s14a

Posted 09 November 2012 - 11:39 AM

Hi NissanSilvia,

I've usually been posting up a lot of stuff on JDMST, but I have now seen better light and found NissanSilvia is actually a lot more technical and better suited to me.
Anyway, majority of the following will be cut and paste from the other forum, so I can keep it as detailed as possible of the process and build status I have had with my 14.

:D


Please feel free to join us aswell if you own a s14 :D Click me to join TEAMS14
Posted Image

#2 Toro Seven

    It doesn't matter if you win by an inch or a mile, winning&#

  • Standard Member
  • Classifieds Items
  • Pip
  • 66 posts
  • Joined:03-November 11
  • Location:Australia NSW
  • Car:97' s14a

Posted 09 November 2012 - 11:46 AM

This is my engine build specs atm, still awaiting pistons and rods to turn up from the States however:

Nitto 86.5mm 8.5:1
Nitto H-Beam Rods
ARP2000 rod bolts
ARP Head studs
ARP Main bolts
ACL Race series engine main, rod & thrust bearings
Block & crank chemically cleaned, honed and checked
Oil ports will be thoroughly cleaned so no chance of starvation (again)
OEM timing chain
GKtech oversized sump
BC 1.1mm hg
BC ex cam gear
BC 264/264 cams
BC titanium retainers and springs
HiOctane RAS
OEM VCT
Mazworx Inlet Plenum
ID2000cc injectors
Hypertune 90mm TB
Turbosmart Race-Port BOV
Precision 5858 CEA BB
Kelway Steampipe manifold
Turbosmart Comp-Gate40
AEM Wideband wired to Haltech
Haltech Platinium Pro plug in
Haltech Boost solenoid
Haltech 4 Bar map sensor
Haltech usb plug in

#3 Matty*

  • Joined:08-September 10
  • Location:Australia QLD
  • Car:AE86 - A31 - R33

Posted 09 November 2012 - 12:17 PM

Nice engine spec list!!!!!!

#4 Toro Seven

    It doesn't matter if you win by an inch or a mile, winning&#

  • Standard Member
  • Classifieds Items
  • Pip
  • 66 posts
  • Joined:03-November 11
  • Location:Australia NSW
  • Car:97' s14a

Posted 09 November 2012 - 12:48 PM

Posted Image
Posted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted Image

Edited by Toro Seven, 09 November 2012 - 12:53 PM.


#5 Toro Seven

    It doesn't matter if you win by an inch or a mile, winning&#

  • Standard Member
  • Classifieds Items
  • Pip
  • 66 posts
  • Joined:03-November 11
  • Location:Australia NSW
  • Car:97' s14a

Posted 09 November 2012 - 12:55 PM

Posted ImagePosted Image
And the progress become like this:
Posted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted Image

Posted ImagePosted ImagePosted Image

#6 george.k

  • Joined:18-October 08
  • Car:200sx

Posted 09 November 2012 - 02:02 PM

excited to see this mang... u need to take me for a spin when its done an convince me to replace the 35/40

#7 Bangaladesh

  • Joined:26-November 07
  • Car:Silvia

Posted 09 November 2012 - 02:04 PM

more pics of the girl :ph34r:

#8 bees14a

  • Joined:02-May 11
  • Location:Australia NSW
  • Car:s14a

Posted 09 November 2012 - 02:47 PM

sweet build! wher did u source the slam cooling panel from n how much??

#9 Johno333

  • Joined:29-May 12
  • Location:Australia NSW
  • Car:Autech 180sx.5

Posted 09 November 2012 - 02:56 PM

I like that engine spec list. That is a nice engine spec list.

#10 Toro Seven

    It doesn't matter if you win by an inch or a mile, winning&#

  • Standard Member
  • Classifieds Items
  • Pip
  • 66 posts
  • Joined:03-November 11
  • Location:Australia NSW
  • Car:97' s14a

Posted 09 November 2012 - 03:01 PM

The cooling panel was from a member of TeamS15, named Ahmed. Not sure of surname

#11 Toro Seven

    It doesn't matter if you win by an inch or a mile, winning&#

  • Standard Member
  • Classifieds Items
  • Pip
  • 66 posts
  • Joined:03-November 11
  • Location:Australia NSW
  • Car:97' s14a

Posted 09 November 2012 - 03:04 PM

My drive-line consists of the following:

Engineered to Slide Z32>SR20 Conversion plate & Gearbox cross-member
Z32 Gearbox with machined bell housing
Modified dog leg shifter
1 piece custom tail shaft
NPC Hi Torque clutch
NPC 10 pound Lightweight flywheel

#12 sean133

  • Joined:30-October 11
  • Location:Australia SA
  • Car:commodore

Posted 09 November 2012 - 04:15 PM

so neat!! engine bay looks nuts..

#13 rezzy_S13

  • Joined:09-March 11
  • Location:Australia NSW
  • Car:SIlvia s13

Posted 09 November 2012 - 05:30 PM

Nice build so far bud :)

i like the way you did the tubs too... did you make them your self or more info?

#14 sssturbo

  • Joined:02-July 08
  • Location:Australia TAS
  • Car:S14 200sx

Posted 09 November 2012 - 05:31 PM

this is awesome, read your build on jdmst a while ago

#15 BossTG

  • Joined:28-March 10
  • Location:Australia QLD

Posted 09 November 2012 - 05:47 PM

f**kin love this car! Purple and white is boss as f**k

#16 Jake26

  • Joined:05-April 11
  • Location:Australia QLD

Posted 09 November 2012 - 06:14 PM

Wow this is awesome, epic number plates too :lol:

#17 -RPS13-

  • Joined:08-February 10
  • Location:Australia NSW
  • Car:5/97 RPS13

Posted 09 November 2012 - 08:04 PM

Serious build, but no sump extension??

#18 bees14a

  • Joined:02-May 11
  • Location:Australia NSW
  • Car:s14a

Posted 09 November 2012 - 09:40 PM

View PostToro Seven, on 09 November 2012 - 03:01 PM, said:

The cooling panel was from a member of TeamS15, named Ahmed. Not sure of surname

cheers mate

#19 blingcommander

  • Joined:05-October 06
  • Location:Japan
  • Car:Scooty-Puff Jr.

Posted 09 November 2012 - 11:13 PM

slick ride dude, looks like you are a man with a plan.

View Postrezzy_S13, on 09 November 2012 - 05:30 PM, said:

i like the way you did the tubs too... did you make them your self or more info?
looking like rex kelway tubs

View Post-RPS13-, on 09 November 2012 - 08:04 PM, said:

Serious build, but no sump extension??
looks like a dummy engine to me. engine list says he is still waiting on the pistons

View Postbees14a, on 09 November 2012 - 09:40 PM, said:

View PostToro Seven, on 09 November 2012 - 03:01 PM, said:

The cooling panel was from a member of TeamS15, named Ahmed. Not sure of surname

cheers mate
i have one that looks the same if you are interested

#20 brent47

  • Joined:29-January 04
  • Location:Australia SA
  • Car:jdm 15

Posted 10 November 2012 - 07:23 AM

Love it, posting for updates!

#21 colsil

  • Joined:19-April 10
  • Location:Australia VIC
  • Car:s13 power by rb25det

Posted 10 November 2012 - 08:13 AM

nice build mate clean engine bay

#22 Toro Seven

    It doesn't matter if you win by an inch or a mile, winning&#

  • Standard Member
  • Classifieds Items
  • Pip
  • 66 posts
  • Joined:03-November 11
  • Location:Australia NSW
  • Car:97' s14a

Posted 12 November 2012 - 08:36 AM

View Postgeorge.k, on 09 November 2012 - 02:02 PM, said:

excited to see this mang... u need to take me for a spin when its done an convince me to replace the 35/40
Anytime George, when it is eventually built I'll take you for a spin. I honestly thought your 35/40 would have been laggier.
Very very clean 15.

View PostJohno333, on 09 November 2012 - 02:56 PM, said:

I like that engine spec list. That is a nice engine spec list.

View Postsean133, on 09 November 2012 - 04:15 PM, said:

so neat!! engine bay looks nuts..

View Postrezzy_S13, on 09 November 2012 - 05:30 PM, said:

Nice build so far bud :)

i like the way you did the tubs too... did you make them your self or more info?

View Postsssturbo, on 09 November 2012 - 05:31 PM, said:

this is awesome, read your build on jdmst a while ago

View PostBossTG, on 09 November 2012 - 05:47 PM, said:

f**kin love this car! Purple and white is boss as f**k

View PostJake26, on 09 November 2012 - 06:14 PM, said:

Wow this is awesome, epic number plates too Posted Image

View Post-RPS13-, on 09 November 2012 - 08:04 PM, said:

Serious build, but no sump extension??

View Postbrent47, on 10 November 2012 - 07:23 AM, said:

Love it, posting for updates!

View Postcolsil, on 10 November 2012 - 08:13 AM, said:

nice build mate clean engine bay

Thanks guys. A lot of hard work from Anthony (Dahtone Racing), Garry (Gazspeed) and myself have been put into this build.
The tubs were pre fabbed from Rex Kelway, however a lot of fab work was needed to ensure they fit right. They aren't a quick job to do.

I'm either going to be using a GK Tech alloy sump, or a Moroso, still debating over the two

Edited by Toro Seven, 12 November 2012 - 08:36 AM.


#23 brent47

  • Joined:29-January 04
  • Location:Australia SA
  • Car:jdm 15

Posted 12 November 2012 - 10:42 AM

I use a genuine Tomei and it's flawless, even took a big hit at Winton Marsuri a few times and it only creased it. Haven't even bothered dropping it and hammering it out as it's just not worth it.
I see 4.1 liters of oil capacity with it.
Only chose it over the Morosso as Andrew Hawkins said something about a lil surge with his Morosso and because Tomei know there shit.

Wouldn't hesitate to go a GK tech if i some how f**ked it royally as they're an identical copy.



#24 brent47

  • Joined:29-January 04
  • Location:Australia SA
  • Car:jdm 15

Posted 12 November 2012 - 10:43 AM

Just re-read alloy as in the Greddy copy's? Or his V2 sheet metal/Tomei copy?

#25 Red_Gem

  • Joined:18-October 04
  • Location:Australia SA
  • Car:gtr

Posted 12 November 2012 - 10:57 AM

I have an ARC hi volume sump for sale if interested. Also mainly posting for updates. Very cool.

#26 Toro Seven

    It doesn't matter if you win by an inch or a mile, winning&#

  • Standard Member
  • Classifieds Items
  • Pip
  • 66 posts
  • Joined:03-November 11
  • Location:Australia NSW
  • Car:97' s14a

Posted 01 February 2013 - 11:47 AM

Posted Image

#27 Toro Seven

    It doesn't matter if you win by an inch or a mile, winning&#

  • Standard Member
  • Classifieds Items
  • Pip
  • 66 posts
  • Joined:03-November 11
  • Location:Australia NSW
  • Car:97' s14a

Posted 01 February 2013 - 11:48 AM

I ended up getting a morosso sump.
Engine is almost ready for assembly.
Got a S15 dash now in the car.
Bought some Defi Advance BF oil temp water temp and boost guages
And bonnet and guards getting sprayed

#28 robJDM

  • Joined:12-April 07
  • Location:Australia NSW
  • Car:S15

Posted 01 February 2013 - 12:53 PM

Love the way this is heading man. I saw it out at WTAC looked the goods.
Who's doing the motor build? Nice list with nitto goodness :)

#29 Toro Seven

    It doesn't matter if you win by an inch or a mile, winning&#

  • Standard Member
  • Classifieds Items
  • Pip
  • 66 posts
  • Joined:03-November 11
  • Location:Australia NSW
  • Car:97' s14a

Posted 27 May 2013 - 12:08 PM

Posted ImagePosted ImagePosted Image

#30 saadn

  • Joined:11-February 11
  • Location:Australia SA
  • Car:JDM s15

Posted 27 May 2013 - 01:55 PM

Well this is just a little bit awesome. Sorry I must have missed it what's this being built for?





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

Common Links

  • About Us
  • Privacy Policy
  • User Agreement
  • Help & Support Forums
  • Advertise
  •  

    By your continued use of this site, you agree to follow all Rules & Guidelines and abide by the User Agreement outlined in our Terms & Conditions.

    Hardtuned Network is hosted by Sanity Technology

    Design, Site Management & Hotness provided by Loz.

    Big thanks to all our members and volunteers for making this network what it is today!