It's time to say THANKS! Are you a devoted NS/HT Member? If so click here for something special
TO TUB OR NOT TO TUBthat is the question
Posted 22 December 2011 - 08:30 AM
i wish this one didnt also......
this has s13 coilovers(turned 45 degrees to adjust castor/camber), s14 lca's, s15 knuckles
rear s14 cradle, r33 hubs, s14 rear shocks with coilover spring and fd tops
he also "moved the 13b engine forward so that the weight distribution was better suited to drift"
Posted 22 December 2011 - 12:20 PM
correct me if i am wrong, there is nothing overly wrong with the fd suspension set up? why would he go to all that effort and work to change to silvia gear?
Posted 22 December 2011 - 01:02 PM
Posted 22 December 2011 - 02:04 PM
Posted 22 December 2011 - 02:09 PM
Posted 02 January 2012 - 07:49 AM
Anyone got build links for flaming?
Posted 02 January 2012 - 08:06 AM
Fuse boxes and all that are easy to work out once you have the metal in there.
Personally If you are building up a track only car from a shell for drift I don't see why you wouldn't. Don't forget to hammer the hell out of the rear part of the arch / firewall as well too tho cos even with 7 deg of caster and a 9J -2 on a 35mm longer LCA I still had to clearance the firewall side of the arch with a hammer.
PS I don't know much about FD suspension vs Silvia when it comes to tuning but having owned both the FD drifted like shit...
Edited by dirty_rb30, 02 January 2012 - 08:07 AM.
Posted 04 January 2012 - 04:31 PM
No need to hate on something based on a photo from a practice day on the cars 1st ever outing..
Posted 13 February 2012 - 08:04 PM
Posted 24 March 2012 - 10:06 PM
Posted 24 March 2012 - 10:09 PM
step two: fill hole created in step one with steel
Posted 25 March 2012 - 08:13 PM
Posted 25 March 2012 - 08:37 PM
Check out my build thread with some tub pics. hope it helps
Posted 26 March 2012 - 08:28 PM
would still like to see how people are doing it with trailer guards.
Posted 29 March 2012 - 07:07 PM
I really don't see the point. Why not just run 8.5 or 9 +25 fronts and run LCA's as long as U want to get the width u want. Tub clearance will never be an issue. Job done.
Posted 31 March 2012 - 06:29 AM
Be good if u could tub the whole front and rear as wheel.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users