Jump to content


The "i can lend you" thread 

147 replies to this topic

#91 s13drifting

  • Joined:20-August 10
  • Location:Australia ACT
  • Car:silvia s13

Posted 11 November 2010 - 07:24 PM

borrow: anyone got set of stock wheels or rims with high profile tread and has to be more than 87v. need to raise my car 100mm and the wheels/tires i got are 83v. any help would be much appreciated thanks

#92 the_moose

  • Joined:09-April 08
  • Location:Australia ACT
  • Car:S13

Posted 11 November 2010 - 10:56 PM

View Posts13drifting, on 11 November 2010 - 07:24 PM, said:

borrow: anyone got set of stock wheels or rims with high profile tread and has to be more than 87v. need to raise my car 100mm and the wheels/tires i got are 83v. any help would be much appreciated thanks

Hey mate, I have got a set of stock S13 wheels with 205/65 R15 tyers that are pretty much brand new that you can borrow.

Pm if interested.

#93 Svarl

  • Joined:28-August 07

Posted 10 February 2011 - 08:49 PM

hey would anyone have a spare CA18DET radiator fan shroud i could borrow/buy pref to buy thanks guys

thanks mark

#94 Stinkypoo

  • Joined:17-March 05

Posted 13 April 2011 - 04:11 PM

I have Stock coilovers if you are willing to leave a deposit with me and you can borrow them.

#95 slk2o0

  • Joined:01-November 08
  • Car:200sx

Posted 15 April 2011 - 08:41 AM

hello,

By any chance here someone has stock lexus is200 wheels that i can borrow to pass my RWC?

willing to pay $$$

thanks

#96 s13drifting

  • Joined:20-August 10
  • Location:Australia ACT
  • Car:silvia s13

Posted 17 April 2011 - 10:36 AM

were are you going for rego check?? you shouldnt need a stock airbox, i passed dickson with a pod filter?

#97 Higas

  • Joined:23-February 10
  • Location:Australia ACT
  • Car:96 Zenki

Posted 17 April 2011 - 01:22 PM

View Postblake12345, on 17 April 2011 - 01:10 PM, said:

oh ok i thought that it wouldnt. Im going to take it to Paul Whyte in Gungahlin. But yeh if i dont need it then thatd be good.

Post some pictures of your car :)

#98 blue_panther9_9

  • Joined:19-August 10
  • Location:Australia ACT

Posted 19 April 2011 - 06:07 PM

I just got a noise complain letter from ACT RTA. Im using the same 3" exhaust without any silencer and it passed the inspection back then when i first transferred my car.Posted Image

Do you think I need to get my exhaust changed? Im very sure that my exhaust is not loud.. only the look is bit scary..Posted Image


if I go there now, and the exhaust does not pass the noise test, would I get defect notice? or will I get another try to fix it? please need a guidance..Posted Image

Edited by verysleepy, 19 April 2011 - 06:08 PM.


#99 blake12345

  • Joined:11-December 10
  • Location:Australia ACT

Posted 03 May 2011 - 02:00 PM

Im looking for a a S13 drivers seat and whatever is needed to mount it to clear rego! Only need to borrow it for a day or so.

Anyone able to help out?


Cheers Blake

#100 blake12345

  • Joined:11-December 10
  • Location:Australia ACT

Posted 17 May 2011 - 07:29 PM

Hey im still looking for a drivers seat. im happy to leave my bride seat as deposit or bring a carton of your favorite brew. im just needing something really soon.

#101 burbon

  • Joined:18-November 09
  • Location:Australia ACT
  • Car:s13

Posted 19 May 2011 - 06:21 PM

I have a seat you can borrow. I dont know what bride tastes like but I dont mind a well brewed ginger beer ;)

Edited by burbon, 19 May 2011 - 07:05 PM.


#102 Dub-D

  • Joined:15-September 08
  • Location:Australia ACT
  • Car:Type X 180sx

Posted 25 May 2011 - 02:07 PM

I have s13 drivers set too if your keen... Northside.

#103 blake12345

  • Joined:11-December 10
  • Location:Australia ACT

Posted 26 May 2011 - 06:51 AM

Hey Dub-D Thanks for the offer but im all sorted now, passed rego and ready to go!!!

#104 Dub-D

  • Joined:15-September 08
  • Location:Australia ACT
  • Car:Type X 180sx

Posted 26 May 2011 - 10:49 PM

That good news I'll see you on the road!

#105 4SKIDS180

  • Joined:10-January 11
  • Location:Australia ACT
  • Car:180sx

Posted 21 September 2011 - 02:24 PM

anyone have a left rear brake caliper i can borrow to suit a 180sx. Need it tonight

Troy 0403131921

#106 moss

  • Joined:25-August 05
  • Location:Australia ACT
  • Car:180SX

Posted 13 January 2012 - 01:43 PM

Stock s13 struts front and back happy to lend with a deposit. Also 180sx splash trays if needed.

#107 cafc_86

  • Joined:13-June 05
  • Location:Australia ACT
  • Car:89' Silvia Q (CA18DET)

Posted 14 January 2012 - 03:33 PM

Moss,

I have spare struts lying about. If your after the strut only you'll have to take the springs off them.

#108 Anthonyyy

  • Joined:02-February 12
  • Location:Australia ACT
  • Car:Aero Spec s15

Posted 22 February 2012 - 06:09 PM

hey guys, just wondering if anyone in canberra could lend me a stock s15 blow off valve to pass RWC? . :D

#109 AnDiiStyLe

  • Joined:07-October 11
  • Location:Australia ACT
  • Car:Nissan 180sx

Posted 26 February 2012 - 07:56 PM

hey, just wondering if anyone has a stock dump and front pipe for RWC that i can borrow :)
and roadworthy 4x114.3 wheels aswell :)
if you can help out itll be awsome
contact andrew on 0410371188

#110 Humpty Dumpty

  • Joined:22-September 10
  • Location:Australia ACT
  • Car:Wide Body 180sx

Posted 27 February 2012 - 04:43 AM

View PostAnDiiStyLe, on 26 February 2012 - 07:56 PM, said:

hey, just wondering if anyone has a stock dump and front pipe for RWC that i can borrow :)
and roadworthy 4x114.3 wheels aswell :)
if you can help out itll be awsome
contact andrew on 0410371188

When do you need the wheels by... I gotta get them out of storage...

#111 the_moose

  • Joined:09-April 08
  • Location:Australia ACT
  • Car:S13

Posted 27 February 2012 - 05:53 PM

Also got some wheels if needed.

#112 blake12345

  • Joined:11-December 10
  • Location:Australia ACT

Posted 28 February 2012 - 09:02 AM

Ive got a stock dump pipe and Ive also got a set of wheels if you need them

#113 Anthonyyy

  • Joined:02-February 12
  • Location:Australia ACT
  • Car:Aero Spec s15

Posted 29 February 2012 - 09:23 AM

hey guys i also need the wheels! ~ i'll let you know within this next week if that's cool ?!

thanks!

#114 Humpty Dumpty

  • Joined:22-September 10
  • Location:Australia ACT
  • Car:Wide Body 180sx

Posted 01 March 2012 - 12:57 PM

Guy just wondering if anyone has a spare RB20 or RB25 ECU that i can either borrow or buy...

Edited by Humpty Dumpty, 01 March 2012 - 01:51 PM.


#115 POZ35T

  • Joined:28-December 04
  • Location:Australia ACT
  • Car:S15, MY12 WRX

Posted 05 March 2012 - 06:59 AM

hey guys anyone have s14-s15 wheels with roadworthy tyres i can borrow?

cheers

Edited by POZ35T, 05 March 2012 - 07:12 AM.


#116 AnDiiStyLe

  • Joined:07-October 11
  • Location:Australia ACT
  • Car:Nissan 180sx

Posted 10 April 2012 - 11:01 PM

just wondering if anyone has 4 stud spacers i could borrow,
my wheels are rubbing against my springs, and i wanna know how much space i can clear
when i buy spacers to get it flush to my guard,
looking for BOLT ON spacers pcd 114.3 4 STUD probably more than 15mm space,
just need it for like, 1 day.

#117 KENut

  • Joined:18-January 11
  • Location:Australia ACT
  • Car:KE70

Posted 11 April 2012 - 06:01 AM

PM Sloth, he's got some unused ones for sale.

#118 suraj

  • Joined:29-November 08
  • Car:nissan s14 200sx

Posted 06 May 2012 - 10:00 AM

Got done for "insufficient ground clearance"........
Does anyone have some Tein C spanners I could borrow, I have no idea where mine have gone. Need to raise my car before wednesday.

Thanks in advance.

#119 Humpty Dumpty

  • Joined:22-September 10
  • Location:Australia ACT
  • Car:Wide Body 180sx

Posted 06 May 2012 - 02:08 PM

If you cant find any try a screw driver and a hammer.... That always works

#120 s13drifting

  • Joined:20-August 10
  • Location:Australia ACT
  • Car:silvia s13

Posted 06 May 2012 - 04:56 PM

View Postsuraj, on 06 May 2012 - 10:00 AM, said:

Got done for "insufficient ground clearance"........ Does anyone have some Tein C spanners I could borrow, I have no idea where mine have gone. Need to raise my car before wednesday. Thanks in advance.

do they have to be tein? i have hsd ones





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users




dfp


Common Links

  • About Us
  • Privacy Policy
  • User Agreement
  • Help & Support Forums
  • Advertise
  •  

    By your continued use of this site, you agree to follow all Rules & Guidelines and abide by the User Agreement outlined in our Terms & Conditions.

    Hardtuned Network is hosted by Sanity Technology

    Design, Site Management & Hotness provided by Loz.

    Big thanks to all our members and volunteers for making this network what it is today!