Jump to content

cjmotor

Platinum Member
  • Content count

    1,689
  • Joined

  • Last visited

Everything posted by cjmotor

  1. kaaz hypoid LSD gear oil (Special formula)selling $79+shipping Grade:GL-5 80W-90 Part No.LSD025606 note:2L/ Greatly improves durability and reduces LSD chattering noise
  2. ALL INSTOCK PLEASE PM US STOCK REALLY TO GO IT TAKE 2-3 day arrived your door we have all instock please pm us please see our section http://www.nissansilvia.com/forums/index.php?showforum=96 Tomei unversial fuel reg -type s selling $169 shipped Tomei unversial fuel reg -type L selling $269 shipped Tomei injector for sr20 rb25 we have 555cc and 740cc instock 555cc injector-189 each 740cc injector-199 each 4 spray and direct plus in 555cc*4=$759 shipped 740cc*4=$799 shipped 555cc*6=$1139 shipped 740cc*6=$1199 shipped Tomei fuel pump kit GT-R BNR32 -17042R585 selling $ 569 shipped BCNR33 17042R595 selling $ 569 shipped BNR34 -183004 selling $ 569 shipped GTS HCR32 -183001 selling $ 499 shipped ECR33 -183002 selling $ 499 shipped ER34 -183003 selling $ 499 shipped [P]S13 -183001 selling $ 499 shipped S14 -183002 selling $ 499 shipped S15 -183003 selling $ 499 shipped 180SX [R]PS13- 183001 selling $ 499 shipped Tomei camshaft Poncam /procamfor: Silvia SR20DET (S13, 14, 15)-$565+shipping IN256 EX256 11.5 LIFT Skyline RB25DET ECR33GTST)-$815+shipping IN256 EX256 8.5 LIFT Skyline RB25DET (ER34GTST)-$815+ shipping IN260 EX 260 9.15 LIFT Skyline RB26dett-$815+shipping IN260 EX260 9.15 LIFT Skyline RB26dett-$815+shipping IN270 EX270 10.25 LIFT Skyline RB26dett-$815+shipping IN270 EX270 10.8 LIFT Tomei camshaft proncam for sr20 /rnn14 ff (lash type or sold type) silvia sr20Det (s13 s14 s15)-$649+ shipping IN260 ex 260 12.00 Lift in 270 ex 270 12.50 lift silvia sr20Det (Rnn14)-$649+ shipping IN260 ex 260 12.00 Lift in 270 ex 270 12.50 lift silvia ca18Det (s13 180sx)-$649+shipping IN260 ex 260 8.8 Lift in 270 ex 270 8.8 lift IN260 ex 260 10.25 Lift in 270 ex 270 10.25 lift Tomei camshaft poncam for evo 9 only $799+ shipping in 260 ex 260 11.5 lift Tomei camshaft poncam for evo 9 only $799+ shipping in 270 ex 270 11.5 lift Tomei camshaft poncam for evo 9 only $799+ shipping in 280 ex 280 11.5 lift Tomei camshaft poncam for evo 4-8 $799+ shipping in 260 ex 260 11.5 lift Tomei camshaft procam for evo 4-8 $799+ shipping in 280 ex 270 11.5 lift Tomei camshaft poncam for subaru ej20 $1599+ shipping pm us for the spec u want Tomei camshaft procam for subaru ej25 $1599+ shipping pm us for the spec u want Tomei camshaft poncam for subaru ej20 $1599+ shipping pm us for the spec u want Tomei camshaft procam for subaru ej25 $1599+ shipping pm us for the spec u want tomei outlet pipe for sr20 s13 s14 s15 $349 shipped Tomei throttle body 70mm for n15 16119-1n510 selling $995 TOMEI adpter to sr20 s13 s14 s15 -193054 seling $195 Tomei Oil feed Restrictors FOR rB26(ONLY1)$25 shipped Tomei Oil Pan Baffle for RB26, $299 shipped Tomei oil pan baffle for evo 4-7 selling $245 shipped Tomei oil pan Baffle for evo 8 9 selling $255 shipped Tomei Adjustable fuel regulator $239 shipped Tomei valve lifter for rb26dett, $630 shipped Tomei valve lift for rb20det rb25det vg30dett $760 Shipped Tomei valve spring kit for sr20 s13 s14 s15( type a ), $449 shipped Tomei valve spring kit for sr20 s13 s14 s15( type b ), $1099 shipped Tomei vlavs spring kit for ca18 $449 shipped Tomei Valve Spring kit for R33 er34 RB25, $599 shipped Tomei Vlave spring kit for r33 er 34 rb55(type $1099 shipped Tomei Valve Spring kit for R32 33 34 RB26(type a), $599 shipped Tomei Valve spring kit for r32 33 34 rb26 (type $1099 shipped Tomei Valve spring kit for r32 33 34 rb26 (type c) $1679 shipped Tomei valve spring kit for evo 4G63 $449 shipped Tomei valve spring kit for subaru ej20 25 $449 shipped Tomei rocker stopper arm for sr20 , $165 shipped Tomei headgasket for sr20 1.2mm, $420 shipped Tomei headgasket for sr20 1.5mm, $420 shipped Tomei headgasket for sr20 1.8mm, $420 shipped Tomei headgasket for rb20, 1.2mm $420 shipped Tomei headgasket for rb20, 1.5mm $420 shipped Tomei headgasket for rb25 1.2mm, $490 shipped Tomei headgasket for rb25 1.5mm, $490 shipped Tomei headgasket for rb25 1.8mm, $490 shipped Tomei headgasket for rb26 1.2mm, $450 shipped Tomei headgasket for rb26 1.5mm, $450 shipped Tomei headgasket for rb26 1.8mm, $450 shipped Tomei headgasket for rb26 2.0mm, $450 shipped Tomei headgasket for rb26 kit 1.2mm $595 shipped Tomei headgasket for rb26 kit 1.5mm $595 shipped Tomei headgasket for rb26 kit 1.8mm $595 shipped Tomei headgasket for rb26 kit 2.0mm $595 shipped Tomei headgasket for evo 4G63 1.2mm $450 shipped Tomei headgasket for evo 4G63 15mm $450 shipped Tomei headgasket for evo 4G63 1.8mm $450 shipped Tomei valve guide for sr20det $590 shipped Tomei valve guide for rb26dett $695 shipped Tomei solid pivot for sr20 $379 shipped Tomei exhaust maniflod for sr20 , $799 shipped Tomei exhaust maniflod for rb26, $1199 shipped Tomei exhaust maniflod (ver2)+front pipe nissian 350z $2450 shipped Tomei exhaust maniflod for evo 4g63 evo 4-9 +headsheld selling $1499 shipped Tomei exhaust maniflod subaru ej25 $1349 shipped Tomei cam gear for sr20 in and ex (a Pair) $379 shipped Tomei cam gear for rb20 25 26 in and ex (a Pair), $449 shipped Tomei cam gear for ca18 in and ex $449 shipped Tomei cam gear for evo 4g63 in and ex (a apair), $465 shipped Tomei oil pump for rb20 rb25 rb26, $1799 shipped Tomei gear knob-short or long, $95 shipped Tomei oil cap piston type,(nissian car only) $130 shipped -$165 shipped (for mitsubishi car only) Tomei sprak cover for sr20 s14 s15, $139 shipped we have silver and blue instock Tomei blow off valve for 4G63 1-9 $219 shipped Tomei blow off valve for 4G63 evo 1-9 $259 shipped Tomei sprak cover for rb26 (chrome ), $139 shipped Tomei fuel pump braket for 044, $75 shipped Tomei hicas lock II selling $209 shipped Tomei front pipe kit for evo 7-9 selling $819+shipping Tomei front pipe kit for evo 4-6 selling $819+shipping Tomei z32 afm pus selling $49 shipped Tomei Timing Belt Guide subaru ej20 25 $119 shipped
  3. Os Giken we have instock really to go OS Giken Close Ratio Gear Kit Our OS Close Ratio Gear Kit is produced for those who are seeking a solution for better results. The ratio of the OS gear set is determined through our long research and many actual track tests, so that it is possible to use the performance of your highly modified engine to its full extent. Carefully selected quality materials are used, and every gear is forged for extra strength. Further more, metal surface processing called "hard shot peening" are given to the gears so that they can hold a heavier load more reliably. Our interest in this OS Close Ratio Gear Kit is just in the quality, not in the production costs Nissian FS5W71C (S13 SR20, S14) 5-speed $4450+shiping includes strengthened input shaft and main shaft Suits applications up to 600hp FS5W30A (ECR33, ER34, BNR32, BCNR33, Z32) 5-speed $4250+shipping includes strengthened input shaft Suits applications up to 800hp Mazda R15M-D (FD3S RX-7) 5-speed $3650+shipping includes strengthened input shaft Suits applications up to 600hp OS Giken Racing Clutch - Single Plate The OS Giken single plate racing clutch has been designed for increased power handling over standard for naturally aspirated vehicles. Features New design featuring larger diameter discs Aluminium or Stainless steel cover plate Honda S2000 AP1 features 215mm diameter discs Features high clamping force and light clutch pedal force Suitable for naturally aspirated and turbo vehicles less than 2L super single plate (come with flywheel and bearing) nissan sr20 s13 s14 5 speed selling $ 1600+ shipping nissan sr20 s15 6 speed $ 1600+ shipping mit evo 4 -9 (come with coversiaon kit )selling $1950+ shipping OS Giken Racing Clutch - Twin Plate Racing The OS Giken Racing Clutch twin plate design allows for very high horsepower from turbo and other performance vehicles. The twin plate aluminium racing clutch features up to 10,700Nm of clamping force. Features New large design 215-225mm clutch discs New design clutch cover with high clamping force Maintains light clutch pedal force and smooth operation Centre hub features dampener and lightened performance flywheel included Some genuine parts may be required for installation on some vehicles, see the website link for further details twin plate (come with flywheel and bearing) str 2c red nissan sr20 s13 s14 5 speed selling $2250+ shipping nissan sr20 s15 6 speed $2150 +shipping mit evo 4 -9 (come with coversiaon kit )selling $2900 +shipping mazda rx7 fd3 (come with coversiaon kit )selling$ 2900+ shipping nissan rb20 25 r32 gtst r33 gtst selling $2250 +shipping nissan rb26 bcr33 gtr (come with coversiaon kit )selling$2900 +shipping
  4. GENUINE WALBRO FUEL PUMP! Directly imported from USA Pumps are shiny smooth silver They are coated in a thin film of OIL from the factory They have walbro seal, model no, Pat. no and other informations engraved on it come with filter only THESE PUMPS FLOWS approximately 255 LITRE PER HOUR AND CAN SUPPORT CARS UPTO 500 HORSE POWER. Includes:- Walbro GSS-342 Pump with fitting kit (comes with English instruction) selling $128 shipped
  5. Special offer this monthis for tomei poncam or procam Tomei camshaft Poncam : sr20 s13 s14 s15 143043-Silvia SR20DET (S13)-$565+shipping IN256 EX256 11.5 LIFT 14344- Silvia SR20DET (S14/15)-$565+shipping IN256 EX256 11.5 LIFT Tomei camshaft Poncam : sr20 s13 s14 s15 143043custom -Silvia SR20DET (S13)-$565+shipping IN270 EX270 11.5 LIFT 14344-custom Silvia SR20DET (S14/15)-$565+shipping IN270EX270 11.5 LIFT Silvia SR20DET (S13 s14/s15)-$565+shipping IN260 EX260 12.0 LIFT Silvia SR20DET (S13/s14/s15)-$565+shipping IN270 EX270 12.5 LIFT 143043-Silvia SR20DET (S13/s14/s15)-$565+shipping IN280 EX280 12.5 LIFT Tomei camshaft Poncam -nissan skyline rb20 /25 26 143019-Skyline RB20DET HCR32GTST -$769+shipping IN256 EX256 8.5 LIFT -Skyline RB20DET HCR32GTST -$769+shipping IN260 EX260 10.25 LIFT Skyline RB20DET HCR32GTST -$769+shipping IN270 EX270 10.25 LIFT 143020-Skyline RB25DET ECR33GTST before 97 )-$769+shipping IN256 EX256 8.5 LIFT 143050-Skyline RB25DET ECR33GTST after 97 )-$769+shipping IN256 EX256 8.5 LIFT 143021-Skyline RB25DET ECR33GTST before 97 )-$769+shipping IN264 EX264 8.5 LIFT 143051-Skyline RB25DET ECR33GTST after 97 )-$769+shipping IN264 EX264 8.5 LIFT 143023-Skyline RB25DET (ER34GTST)-$$769+ shipping IN260 EX 260 9.15 LIFT 143024-Skyline RB25DET (ER34GTST)-$$769+ shipping IN270 EX 270 9.15 LIFT 143005 -Skyline RB26dett r32/33 gtr-$769+shipping IN260 EX260 9.15 LIFT 143006 -Skyline RB26dett r32/33 gtr-$769+shipping IN270 EX270 9.15 LIFT 143018 -Skyline RB26dett r34 gtr-$769+shipping IN260 EX260 9.15 LIFT 143018 custom -Skyline RB26dett r34 gtr-$769+shipping IN270 EX270 9.15 LIFT Tomei Cam gear sr20 in and ex - $469 shipped Tomei cam gear rb20/25 26 in and ex $375 shipped
  6. warning all genuine sard product it will have security seal sticker-if not all ebay selling is selling copy sard fuel reg please notice all buyer copy REAL real copy REAL real copy REAL real copy REAL real copy REAL real Sard adjustable Fuel regulators utilizes an extra light weight diaphram assemply that provides excellent pulsation dampening; to dampen the pressure spikes caused by high flow fuel pumps and cycling injectors (especially non-factory high flow fuel injectors). Sard Fuel pressure regulators are designed to provide the correct fuel pressure for any high performance fuel injected vehicle. The type R is designed for high horsepower naturally aspirated fuel injected and turbo charged engines. Due to the boost compensation design, it can provide more fuel under high turbo boost conditions. Construction is of high quality as parts are machined from billet aluminum. Pressure adjustment is made easy by turning the built - in 360 degree nut. When installing higher capacity fuel injectors, the fuel pressure needs to be adjusted to accomodate the new injectors. In addition to allowing tuning to accomodate higher capacity fuel injectors, the SARD Adjustable Fuel Pressure Regulator can be used with stock fuel injectors to increase fuel delivery by increasing fuel pressure. Features - Every component of the SARD fuel pressure regulator was designed and built specifically to maintain a steady fuel pressure. - The regulator housing has a 1/8PT service hole to allow for the installation of a fuel pressure regulator or fuel line to additional fuel injectors. - The regulator allows the use of either an 8mm hose nipple or an AN#6 adapter bolt. - The body of the regulator is constructed of aluminum, while hose fittings are anodized blue. - A mounting bracket is included with the regulator in greatly simplify mounting in the engine bay. Notes - The TYPE-R regulator utilizes a larger-size diaghram for hard-tuned turbo vehicles. - The TYPE-R regulator is designed to maintain steady fuel pressure even under high boost conditions This Sard adjustable Fuel regulators utilizes an extra light weight diaphram assemply that provides excellent pulsation dampening; to dampen the pressure spikes caused by high flow fuel pumps and cycling injectors (especially non-factory high flow fuel injectors). Sard Fuel pressure regulators are designed to provide the correct fuel pressure for any high performance fuel injected vehicle Product Specifications: - Billet Aluminium - Anodized Finish - Simple Adjustment - 360 Degree Adjusting Nut - 1/8PT Service Hole - Accepts 8mm Hose Nipple or AN#6 Adapter Bolt WE HAVE SILVER , RED , BLUE AND GOLD and black COLOUR SELLING $169 SHIPPED 100 % genuine sard if not money back
  7. Price : $3,339 Condition : Used Forced Performance is proud to announce the debut of our 100% brand new, patent pending, dual ceramic ball bearing design within the FP RED™ Turbocharger for the Lancer Evolution 4-9 vehicles. This new design virtually eliminates any limit to allowable thrust load within the turbocharger while simultaneously reducing drag and rotational resistance to spool up. The increased thrust limit significantly extends the longevity of the turbocharger when operated beyond its published flow and boost limits and eliminates the turbochargers sensitivity to lubrication interruptions due to hard acceleration and cornering forces. Recent performance testing at the MHI Research and Development Laboratories in Nagasaki, Japan verified that the design dramatically exceeds the normal allowable thrust loads for TD05/6 type turbochargers and allows for a significant increase in the available airflow from the turbocharger without bearing damage. Internally very little is shared with any previously offered turbocharger anywhere in the world beyond the description of "ball bearing". This patent pending design is 100% blank page and will have an important impact on turbocharger bearing systems for years to come. The races and ceramic balls of the turbocharger are the highest grade components available anywhere, period. From this point forward the standard journal bearing system will not be available for the FP RED™ Turbocharger for the Lancer Evolution 4-9. Lancer Evolution 4-9 Ball Bearing Turbos and Upgrade Information Information listed below is in regard to our original Journal Bearing FP RED™ Turbocharger. this turbo now includes our FP Evo Gen 2 Oil Supply Line. This turbo features a 12 month warranty. You must activate this warranty within 30 days of purchasing this turbocharger by returning the warranty card included with the turbocharger and a copy of your receipt if purchased from a supplier other than Forced Performance. Please contact us directly if you have any problems or questions regarding your turbocharger, disassembly of the turbocharger will void the warranty. NEW to the FP RED™ for the Evolution IX Line up is our own custom 84mm Flow Advancement Port™ compressor cover. You can now choose the new FP 84mm Flow Advancement Port™cover or stick with the standard 64mm Stock Appearing compressor cover as shown above. The larger inlet configuration helps reduce huffing and surging sounds that are often reported with these larger stock format hybrids when lugging the engine at low RPM and high boost pressure but perhaps even more useful is the way it helps feed the splitter blades of the compressor wheel resulting in increased flow. This larger inlet also increases the volume of the intake air pipe and reduces vacuum at the inlet of the turbo. Additionally the volute of the cover is now exactly tailored to the HTA wheel aero for the best performance possible. The 84mm inlet Flow Advancement Port™ version can be used with our Intake Air Pipe which is located in the Related Products section at the bottom of the page. The intake is undercover black and designed to replace the stock intake air pipe perfectly allowing the use of the recirculated BOV and the valve cover crankcase vent as in the OEM application. A non-recirculated version is also now available. The 84mm Flow Advancement Port™ cover can also be used with standard 3" air intake pipes by utilizing a straight 3" coupler also located in the Related Products section at the bottom of this page.
  8. Price : $3,339 Condition : Used Forced Performance is proud to announce the debut of our 100% brand new, patent pending, dual ceramic ball bearing design within the FP GREEN™ Turbocharger for the Lancer Evolution 4-9 vehicles. This new design virtually eliminates any limit to allowable thrust load within the turbocharger while simultaneously reducing drag and rotational resistance to spool up. The increased thrust limit significantly extends the longevity of the turbocharger when operated beyond its published flow and boost limits and eliminates the turbochargers sensitivity to lubrication interruptions due to hard acceleration and cornering forces. Recent performance testing at the MHI Research and Development Laboratories in Nagasaki, Japan verified that the design dramatically exceeds the normal allowable thrust loads for TD05/6 type turbochargers and allows for a significant increase in the available airflow from the turbocharger without bearing damage. Internally very little is shared with any previously offered turbocharger anywhere in the world beyond the description of "ball bearing". This patent pending design is 100% blank page and will have an important impact on turbocharger bearing systems for years to come. The races and ceramic balls of the turbocharger are the highest grade components available anywhere, period. Lancer Evolution 4-9 Ball Bearing Turbos and Upgrade Information Curt Brown has put this turbo to the test for us and has posted an awesome 605whp backed up by a 602whp graph. This thing really is the ultimate street car turbo!
  9. Price : $3,339 Condition : Used Forced Performance is proud to announce the debut of our 100% brand new, patent pending, dual ceramic ball bearing design within the FP BLACK™ Turbocharger for the Lancer Evolution X vehicles. This new design virtually eliminates any limit to allowable thrust load within the turbocharger while simultaneously reducing drag and rotational resistance to spool up. The increased thrust limit significantly extends the longevity of the turbocharger when operated beyond its published flow and boost limits and eliminates the turbochargers sensitivity to lubrication interruptions due to hard acceleration and cornering forces. Recent performance testing at the MHI Research and Development Laboratories in Nagasaki, Japan verified that the design dramatically exceeds the normal allowable thrust loads for TD05/6 type turbochargers and allows for a significant increase in the available airflow from the turbocharger without bearing damage. Internally very little is shared with any previously offered turbocharger anywhere in the world beyond the description of "ball bearing". This patent pending design is 100% blank page and will have an important impact on turbocharger bearing systems for years to come. The races and ceramic balls of the turbocharger are the highest grade components available anywhere, period. From this point forward the standard journal bearing system will not be available for the FP BLACK™ Turbocharger for the Lancer Evolution X. The FP BLACK™ for the Mitsubishi Lancer Evolution X is the most fully evolved stock appearing variant we offer. It features an 82mm HTA™ compressor wheel with a flow rate of 68lb/min. The turbine side features a large 67mm turbine wheel. The turbo comes standard with an 18psi wastegate actuator and our FP Evo X High Flow Oil Supply Line and turbo oil filter. You may select a lower pressure actuator if needed, but the unit is intended to operate above 18psi of boost pressure. This turbocharger will produce 500-600whp results readily on well prepared engines. This turbo is covered by our 12 month complimentary repair service. You must activate this service within 30 days of purchasing this turbocharger by returning the registration card included with the turbocharger and a copy of your receipt if purchased from a supplier other than Forced Performance. Please contact us directly if you have any problems or questions regarding your turbocharger, dis-assembly of the turbocharger or running an external wastegate will exclude the turbo from complimentary repair service.
  10. Price : $379 Condition : Used HKS GT Actuator Kit for Lancer Evolution X with 4B11 Engine. Boost Pressure: 1.58 - 1.68 kg/cm2 HKS single port actuator with a large diameter diaphragm enables boost stability and increased boost response at higher rpm ranges. Turnbuckle type rod end enables boost level adjustment without the removal of rod end from the crank arm of the turbine. The actuator case is constructed of billet aluminum with a purple alumite finish
  11. Price : $3,799 Condition : Used http://www.hks-power.co.jp/products/turbo/turbinekit/lineup/11004an010.html The HKS GT Series Turbos are based on ball-bearing Garrett units and like the HKS Signature Series have re-engineered compressor and turbine wheels along with specific A/R and trim levels. All GT Series Turbos are designed to be a perfect blend of power and response. HKS achieved this balance by first choosing to use a ball-bearing center cartridge to reduce friction along with an off-center turbo design for improved efficiency and flow. Next HKS carefully tested Trim and A/R levels along with different inlet and outlet diameters to achieve optimal power. The results of this combination are turbos that not only deliver amazing power, but also spool incredibly fast Kit Includes GT Pro Turbine GT2835 88.3 kpa (0.9kgf/cm) HKS strengthened actuator F-Con Mini in some kits Extension dump Pipe Suction Pipe Water and Oil Lines Gaskets required for installation Stainless steel heat shield in some kits Other Short Parts required for installation 【性能】 【特長】 RB25/RB20用の純正置き換えスポーツタービンキットとなります。 チャンバーパイプ,エクステンションフランジは純正や純正置き換え品で取り付け可能です。サクションパイプはエアフロまでKIT内に同梱されています。 GT-Pro S KITを見直す事により性能(レスポンス)向上を実現しました。 既存のGT2530KAI KIT及びGT-RS KITとの外観上の差別化し、サクションアダプタを新規設計してTO4Z風としました。 CHRA Assyはハネウェル製ボールベアリングターボとなります。 過給圧の調整によってノーマルエンジンからチューニングエンジンまで幅広く楽しめるターボキットに仕上がっています。 既存のHKS商品との併用も可能です。 11004-AN010 Nissan - Skyline - ECR33/ER34 - GT2835 kai 56T Skyline - R33 GTS-t S2 - ECR33 Skyline - R33 GTS-t S1 - ECR33 Skyline - R34 GTT - ER34
  12. Price : $4,469 Condition : Used These HKS custom turbocharger units are Garrett based turbos that are designed and built specifically for the performance oriented. From the HKS specific compressor and turbine wheels and blade designs to the thier unique housings, each HKS Signature and GT ball-bearing turbocharger unit is race proven and engineered with the highest standards in performance, function & reliability. These units can be utilized in certain bolt-on applications or custom applications from the basic street car to a full racecar 1401-RA145 HKS T51R SPL BB ball bearing 56T A/R 1.00
  13. Price : $89 Condition : Used Whether you are lying on the beach or watching a race, the HKS towel is sure to make you stand out in the crowd. The towel features the HKS logo, trademark coloured pattern and quote. This Towel is Big 5102-SA016 HKS Big Towel - 900 x 1,800mm
  14. Price : $89 Condition : Used Step out in style, rain, hail or shine with the HKS Umbrella! Featuring the HKS logo and trademark coloured pattern. 5102-SA017 HKS - Umbrella - 1,035mm
  15. Price : $2,395 Condition : Used ITEM DESCRIPTION Part No: TK-RB26DETT-GT2860R-7 Item Name: GARRETT GT2860R TURBO KIT FOR GTR RB26DETT Application: NISSAN SKYLINE GTR BNR32 BCNR33 BNR34 RB26DETT Spec: TURBINE -WHEEL: 53.85MM W/ 62 TRIM -HOUSING: .64 AR COMPRESSOR -WHEEL: 60MM W/ 55 TRIM -HOUSING: .42 AR (2 BOLT INLET AND 2 BOLT OUTLET) Description: Dual Ball Bearing GT2860R turbo (base Garrett P/N 707160-5007) assembly with T25 style turbine inlet. Comes with internally wastegated style T25 turbine housing that is unique and same as Skyline style (tapped turbine inlet holes, unique turbine discharge pattern, and low profile housing neck) and Skyline style compressor housing with 2 bolt inlet and 2 bolt outlet. Includes wastegate actuator bracket and actuator from the factory (also unique to this turbo). - 2 x GARRETT GT2860 BALL BEARING TURBO CHARGERS .
  16. Price : $999 Condition : Used The HKS GT II Wastegates are the latest in wastegate technology. They feature a lower body cast from stainless steel and an anodized purple upper case machined from billet aluminum. The GT II Wastegates weighs approximately 2/3's the weight of the original GT Wastegate and are significantly smaller in height and width. Their compact size combined with the GT II's V-band inlet and outlet flanges allows for versatile mounting in tight spaces. --- GT II Wastegates also include additional wastegate springs which allow for different base boost level starting points. A special tool is also included which allows for the simple installation of the extra wastegate springs. HKS GT II Wastegates are available with either a 50mm or 60mm stainless steel valve, and have base boost levels that range from 0.8kg/cm2 (11.6PSI) - 2.0kg/cm2 (29.0PSI) and 0.6kg/cm2 (8.5PSI) - 2.1kg/cm2 (29.9PSI), respectively. Like all HKS Wastegates, boost can be raised above the base boost setting by using an HKS EVC or VBC boost controller. 14005-AK001 HKS GT II Wastegate 60mm Valve 0.6 - 2.1kg/cm2 / 8.5 - 29.9 PSI
  17. Price : $3,490 Condition : Used Racing Multi-Plate OS Giken Clutches Through our research and development of high performance engines, we realized the need for the production of higher quality, more durable clutch systems to meet the rigorous demands of race and sport driving. Our OS multi-plate clutch is able to transmit engine revolutions and output to the drive train without loss. They are made of the highest quality materials and their durability is second to none. Our continual research and development has brought about many improvements since our multi-plate clutch line's original debut in 1983 and we are confident that our clutches can meet the demands of even the most heavily modified vehicles. Distinctive Features of the OS Multi-Plate Clutch: In spite of its decreased diameter, our clutch allows for extremely efficient power transfer and improved engine response. Our redesigned leverage mechanism of the diaphragm spring on the center cover results in higher pressure of the clutch disk while reducing pedal effort. In addition, ventilation holes are designed to reduce heat generated inside the clutch system and allows for the friction plate dust to exit outside the clutch system, thus increasing reliability and safety. All OS Giken clutches include a corresponding performance flywheel to ensure maximum performance and unlock your vehicle’s potential. Os giken Quad Plate 4 clutch kit nissan Skyline Late R32 / Bncr r33 GTR 5 speed rb26 dett- R4C
  18. Price : $1,684 Condition : Used ARMS TURBINE KIT for EJ SINGLE SCROLL CLICK ON THE IMAGE TO THE RIGHT TO ENLARGE 380PS Now comes standard with the new Billet Actuator. Retains the response feel of the original stock turbo, but delivers increased power gains even at higher up in the power band range without sacrificing torque. PART NUMBER: 173016 400PS+ Retains the low speed power range, with that extra punch at mid to high speed range. This is turbo has the balanced transient characteristics to produce peak power to suit those who want the best of both worlds. PART NUMBER: 173023 450PS+ This turbo has the potential to deliver 450PS with the stock layout; from 4000RPM upwards is where peak power comes in. This Turbo's special characteristics will really show when added engine tuning and internal upgrades are done. PART NUMBER: 173024        EJ S/S Turbo Kit Is Now Available In 3 Models,                  To Suit Everyones Needs. FEATURES FLAT PRIMARY EXHAUST PRESSURE The initial spool characteristics is just right, with a seamless linear power curve that matches the engines RPM with the power output. This gives the best drivability results. MAINTAINING OUTPUT EVEN AT HIGHER TUNED LEVELS With the stock displacement, you can expect to see good power around the 5500rpm mark and higher. But with the increase in the engines displacement, even more potential gains are possible. AVAILABLE IN 3 SIZES The M7760 retains the stock response feel, with added power gains. The M7960 delivers great upper mid range power, with even more power gains possible. When peak power is a priority over response, there is only one option. The M8265 will deliver unleash your engines full potential. 100% BOLT ON The ARMS series turbo kits all come supplied with all the required gaskets and fitting accessories for a true bolt on application out of the box. So it can be installed immediately without the need to hunt for other parts. 1 YEAR WARRANTY The ARMS RB26 M7655/8260 Turbine Kits come with a 1 year limited warranty after the product has been registered with Tomei Powered shortly after purchase. M7760+EJ20 S/S M7960/8265+EJ25 S/S SPECIFICATIONS  ◆ COMPRESSOR WHEEL DATA TYPE TRIM ENTRANCE DIAMETER (mm) OUTER DIAMETER (mm) BLADES EJ20 STD - - - APPROX. 60.0 6/6 EJ25 STD - - - APPROX. 60.0 6/6 ARMS M7760 60 60 52.6 68.0 6/6 ARMS M7960 60 60 52.6 68.0 6/6 ARMS M8265 65 52 54.8 76.2 6/6  ◆ TURBINE WHEEL DATA TYPE TRIM OUTER DIAMETER (mm) EXIT DIAMETER (mm) BLADES EJ20 STD - - - APPROX. 53.0 - EJ25 STD - - - APPROX. 53.0 - ARMS M7760 77 76.9 49.1 56.0 12 ARMS M7960 79 78.4 54.0 61.0 12 ARMS M8265 82 77.1 58.8 67.0 11 INTERNAL COMPONENT ANALYSIS COMPRESSOR HOUSING TURBINE HOUSING BEARING HOUSING BILLET ACTUATOR All the housings made with different materials of metal were first closely examined and tested for energy absorption, friction, and cooling capabilities. The most ideal components were designed and utilized. Our all new Billet Aluminum actuator is designed for added strength. This will give that extra support when needed for higher boost applications.
  19. Price : $1,489 Condition : Used Full-Race is proud to release our latest iteration of our legendary ProStock turbo manifold, designed specifically for the EVO X! This high quality robotically-TIG welded stainless steel turbo manifold is a direct bolt-on replacement for the OEM cast turbo manifold. Designed to work with any stock or stock-based upgraded turbocharger up to 550whp, IE Garrett Evo X 30R, Blouch, FP, etc. If you are looking to maximize power output for a stock-based turbo setup this header is for you! Includes Lifetime warranty against cracking Applications: RHD and LHD EVOX EVO X Prostock turbo manifold features: Precision Fabricated from thick wall stainless steel Robotically TIG welded construction CNC/Ported head flange Sealing surfaces machined flat ensuring a leak free seal ProStock design allows use of all factory or aftermarket components (02 housing, down pipe, oil&coolant plumbing, charge pipes, etc.) Retains the stock heat shield for a stealthy installation and low under hood temps FR vs. STOCK Collector FR vs. STOCK Manifold Full-Race EVOX ProStock Manifold Dyno Results
  20. Price : $624 Condition : Used HKS Direct Multi Recorder (DMR) from Sumo Power - New Release! Whether it’s a lap of the track or your route to work, the new HKS Direct Media Recorder allows you to record and analyse your daily drive to the finest detail. Equipped with two cameras – one forward facing camera for the windscreen and one to monitor your feet – the HKS DMR gives you the ability to maintain a comprehensive record of your driving performance. Containing a 16GB SD card hard drive, giving you over 30 hours of recording, the camera can be used to capture all driving experiences, from the road to the track. And playback could not be simpler – just slot the SD card into your PC and you can analyse your driving in the highest quality. With state of the art GPS and G-sensors as standard, the HKS DMR enables the recording, tracking and timing of your driving on Google maps. Logging of this data is simple too, meaning you can compare performance over time. And the HKS DMR is even useful in those unfortunate driving incidents, giving you the opportunity to keep an accurate visual record of any accidents. Easily mountable to the windscreen and powered through the cigarette lighter, the camera is reliable, lightweight and unnoticeable while recording
  21. http://www.koyoradracing.com/ kOYO RADIATOR CAP 1.3 SELLING $43+SHIPPING Koyo Radiators are designed, manufactured and specified to original equipment (OE) specifications. Koyo radiators are renowned for their OE style design made especially for import cars. Koyo's radiators are also available in plastic tank and aluminum core. Our NocolokR brazing line keeps the highest quality standards, bringing you superior products you can rely on. Koyo is Japan's largest aftermarket radiator manufacturer. The Koyo radiator is produced from aircraft quality aluminum and Heli-arc welded. Heli-arc soldering is the highest quality standard for enforcement along aluminum connections. Product Features: - Fully polished to a mirror finish (Depending on radiator) - 30% more cooling than standard radiators - Handles high revving, high performance motors - Perfect for Turbocharged, Supercharged & Nitrous Oxide equipped engines - Custom built OEM fit - All radiator cores and tanks are specifically designed and built for each application. - No universal fit parts are used. This ensures proper fit, just like your original equipment! -alloy 53mm thick we now keep instock nissan hh022360-nissan skyline r35 gtr vr38dett (48mm thick) selling $750+shipping r020214-nissan skyline r32 2.0L/2.5L 1989-96 (53mm thick )selling $665+shipping r1439-nissan 300zx 3.0 twin turbo 1989-96(53mm thick ) selling $600+shipping r020252-nissan silvia s13 1991-92 2.0L (53mm thick )selling $499+shipping r020252n-nissan silvia s13 1991-92 2.0L (53mm thick )selling $559+shipping (n-flow) r020369-nissan silvia s14/s15 93-00 (53mm thick )selling $499+shipping r020369n-nissan silvia s14/s15 93-00 (53mm thick )selling $559+shipping (n flow) r020442-nissan skyline r34gtt 1988-03 selling(53mm thick )$675+shipping r020442-nissan skyline r33gtst 1993-98 2.5l (53mm thick )selling $675+shipping R2577 NISSAN 350 Z 03-06 (53MM THICK ) SELLING $660+SHIPPING R2999 NISSAN 350 Z 07-08 M/T (53MM THICK ) SELLING $660+SHIPPING mitsubishi r030561-mit lancer evolution 1/2/3/ 92-96 (53mm thick )selling $649+shipping r030939-mit lancer evolution 4/5/6/ 96-01 (53mm thick )selling $649+shipping r2676-mit lancer evolution 7/8/9/ 02-07 (53mm thick )selling $689+shipping hh032412 mit lancer evolution 7/8/9/ 02-07 (half size race use )selling $590+shipping v2979 - mit lancer evoluton 10 4b11 cz4a (48mm thick ) selling $695+shipping mazda r1443-rx7 series 6/7/8 1992-2002 selling $610+shipping v2695-rx8 series 04-08 selling $630+shipping honda R1570-honda SI 1991-00 (32MM THICK )selling $540+shipping R2028-honda integra DC 2 (53MM THICK) 1993-99 selling $600+shipping V2425-honda integra DC5 RSX 02-06 (48MM THICK )selling$620+shipping R2344-honda s2000 1999-2009 (53MM THICK ) selling$630+shipping subaru vh2778-subaru liberty bl5 05-09 turbo m/t (53mm thick )selling $695+shipping sub0632al-subaru wrx impreza 1993-00(53mm thick ) selling $639+shipping r2344-subaru wrx gdb impreza 00-02 2.0l (53mm thick ) selling $650+shipping r2704-subaru wrx gdbb impreza 03-07 2.0l (53mm thick ) selling $650+shipping vh13093 subaru wrx grb gh8 impreza 08 on ward (48mm thick ) SELLING $695+shipping VH13026 SUBARU SG5 (48MM THICK ) SELLING $685+SHIPPING toyota r1856-toyota supra jza80 1993-98 (53MM THICK ) selling $675+shipping R0747 TOYOTA AE86 84-87 (53MM THICK ) SELLING $600+SHIPPING R2358 TOYOTA MRS 2000-2005 (53MM THICK ) SELLING $620+SHIPPING shipping depend where u are qld $20 nsw $25 vic $35 wa $45 tas $50 nt $75 we match all price please pm us instock
  22. http://www.koyoradracing.com/ kOYO RADIATOR CAP 1.3 SELLING $43+SHIPPING Koyo Radiators are designed, manufactured and specified to original equipment (OE) specifications. Koyo radiators are renowned for their OE style design made especially for import cars. Koyo's radiators are also available in plastic tank and aluminum core. Our NocolokR brazing line keeps the highest quality standards, bringing you superior products you can rely on. Koyo is Japan's largest aftermarket radiator manufacturer. The Koyo radiator is produced from aircraft quality aluminum and Heli-arc welded. Heli-arc soldering is the highest quality standard for enforcement along aluminum connections. Product Features: - Fully polished to a mirror finish (Depending on radiator) - 30% more cooling than standard radiators - Handles high revving, high performance motors - Perfect for Turbocharged, Supercharged & Nitrous Oxide equipped engines - Custom built OEM fit - All radiator cores and tanks are specifically designed and built for each application. - No universal fit parts are used. This ensures proper fit, just like your original equipment! -alloy 53mm thick we now keep instock nissan hh022360-nissan skyline r35 gtr vr38dett (48mm thick) selling $750+shipping r020214-nissan skyline r32 2.0L/2.5L 1989-96 (53mm thick )selling $665+shipping r1439-nissan 300zx 3.0 twin turbo 1989-96(53mm thick ) selling $600+shipping r020252-nissan silvia s13 1991-92 2.0L (53mm thick )selling $499+shipping r020252n-nissan silvia s13 1991-92 2.0L (53mm thick )selling $559+shipping (n-flow) r020369-nissan silvia s14/s15 93-00 (53mm thick )selling $499+shipping r020369n-nissan silvia s14/s15 93-00 (53mm thick )selling $559+shipping (n flow) r020442-nissan skyline r34gtt 1988-03 selling(53mm thick )$675+shipping r020442-nissan skyline r33gtst 1993-98 2.5l (53mm thick )selling $675+shipping R2577 NISSAN 350 Z 03-06 (53MM THICK ) SELLING $660+SHIPPING R2999 NISSAN 350 Z 07-08 M/T (53MM THICK ) SELLING $660+SHIPPING mitsubishi r030561-mit lancer evolution 1/2/3/ 92-96 (53mm thick )selling $649+shipping r030939-mit lancer evolution 4/5/6/ 96-01 (53mm thick )selling $649+shipping r2676-mit lancer evolution 7/8/9/ 02-07 (53mm thick )selling $689+shipping hh032412 mit lancer evolution 7/8/9/ 02-07 (half size race use )selling $590+shipping v2979 - mit lancer evoluton 10 4b11 cz4a (48mm thick ) selling $695+shipping mazda r1443-rx7 series 6/7/8 1992-2002 selling $610+shipping v2695-rx8 series 04-08 selling $630+shipping honda R1570-honda SI 1991-00 (32MM THICK )selling $540+shipping R2028-honda integra DC 2 (53MM THICK) 1993-99 selling $600+shipping V2425-honda integra DC5 RSX 02-06 (48MM THICK )selling$620+shipping R2344-honda s2000 1999-2009 (53MM THICK ) selling$630+shipping subaru vh2778-subaru liberty bl5 05-09 turbo m/t (53mm thick )selling $695+shipping sub0632al-subaru wrx impreza 1993-00(53mm thick ) selling $639+shipping r2344-subaru wrx gdb impreza 00-02 2.0l (53mm thick ) selling $650+shipping r2704-subaru wrx gdbb impreza 03-07 2.0l (53mm thick ) selling $650+shipping vh13093 subaru wrx grb gh8 impreza 08 on ward (48mm thick ) SELLING $695+shipping VH13026 SUBARU SG5 (48MM THICK ) SELLING $685+SHIPPING toyota r1856-toyota supra jza80 1993-98 (53MM THICK ) selling $675+shipping R0747 TOYOTA AE86 84-87 (53MM THICK ) SELLING $600+SHIPPING R2358 TOYOTA MRS 2000-2005 (53MM THICK ) SELLING $620+SHIPPING shipping depend where u are qld $20 nsw $25 vic $35 wa $45 tas $50 nt $75
  23. poncam is direct drop in procam u need to change vale spring and cam gear
×