Jump to content

1200ute

Silver Member
  • Content count

    245
  • Joined

  • Last visited

Community Reputation

0 Neutral

About 1200ute

  • Rank
    Standard Member
  • Birthday 08/22/1979

Contact Methods

  • Website URL
    http://

General Info

  • Location
    Australia QLD
  • Gender
    Male
  • Car Type
    Nissan
  • Car Model
    Datsun 1200 ute
  1. 1200 Ute

    It has been over 6 months since the last update and i'm still on the first page... Note much has been done but here a a few pics. Drivers side mirror fitted Interior panels fitted Picked up some clear side indicator last year Bought soe replacement S13 combo switches from Taarks A bit more progress with the fibreglass headliner Windscreen and rear glass is in Main items remaining now are to get the heater sorted, fit the carpet and then small mechanical items like replacing diff gasket, a once over for loose nuts/bolts, missing split pins etc, bleed brakes again as they are spongy and do a minor engine service.
  2. Budget CA S13 Track Car - Upgrades time...

    Good to hear that there is progress again. It seems to be a ghost town here now.
  3. 1200 Ute

    Cheers mate, still slow progress with no noteworthy updates..
  4. efr 6258 t4

    I forgot to also mention reverse rotation as well on the gen 2. More aimed at v engines to allow mirror image engine bays I guess.
  5. efr 6258 t4

    I think the gen 2 turbos were just officially released this week at SEMA. on their Instagram they have some info - new compressor housings and compressor aero, available with v-band outlet on the compressor housing, speed sensor port. They are claiming around 10% increase in power over previous version.
  6. I'm 37 and don't have an import... I have a prado at work and my wife has a cx5 which is the family car. I have a 1200 ute project which I have never driven in 15 or so years.
  7. Scotties15 Scotties15 - yeah it shifts properly and the reverse lockout works. As it isn't mounted properly (just using all thread to space up the adapter) the mount is not rigid and is not a finished product. It would also sit the shift very high in my car and require a large hole in the tunnel. Cheers Big Fist.
  8. No problem mate. I plan to put the gearbox in my ute eventually but the engine is pretty mild at the moment and the car isn't on the road.. I have a build thread on here which is pretty up to date. http://www.nissansilvia.com/forums/index.php?showtopic=476588
  9. Ignore the relocated shifter in this pic (had been rotate 180deg) but it shows the stock shifter and guide plate installed in a billet shifter bracket on the left and the standard shifter bracket on the right. These are selected pages out of a 370z service manual. They show the exploded view of the shifter setup and the procedure for setting the guide plate. The standard shifter uses a large plastic cup and spring for locating the ball of the shifter and allowing for the downward movement required for the reverse lockout, the guide plate then sandwiches the shifter in place and allows for adjustment of the reverse lockout - I assume for wear and tear.
  10. Hey The Big Fist, I have a stock Z34 shifter and it has one of those adjustable top plates so that the reverse lockout can be set properly. I'll try to find pic on my computer tomorrow (I'm away currently) or pages from the service manual. I'm pretty sure the shifter setup is the same or very similar between z33, z34, g35(?) and g36.
  11. If welded I think you can't get to the input and counter shaft (??) bearings.
  12. 1200 Ute

    cheers mate, it'll be a while before any of those items are complete but i'll post photos as they are done.
  13. WOW - What happened?

    Thanks for putting the pics back Loz and thanks to those cunts that pushed for it to happen. Its good to see some more happening on this forum, I normally have a look every day but only at selected pages. edited my post to say cunts like the rest of you cunts!
  14. 1200 Ute

    Also, here is a pic of the 370z 6 speed dummied up behind the CA. Nothing has been done to make these bolt together, just had the motor out and thought it would be good to take a pic.
  15. 1200 Ute

    Now that all the old pics are back here are a few more. I picked up a roof cut to use for making up a fibreglass headliner. I have done a bit more on it since then but it is almost ready for fibreglassing. The plan is to trim the fibreglass so it looks similar to a modern car. This is a mock up for cam sync, it is on the back burner as the CAS works fine for me at the moment. I finally mounted the hilux handle inside the tailgate trim. the mechanism was installed years ago. I plan on leaving the rusty shitty look for the tailgate trim for now and have cleared over the multiple layers of paint and the rust. I have a few bits the an want to sell as well. S13 non-hicas cradle with toe arms. CP pistons for CA18 83.5mm bore (0.5mm over size) and 9.0:1 CR BNIB Aftermarket Industries 3L surge tank, twin 044s and bracket. Comes with 6AN fittings on the tank and pumps. This is new and hasn't been used but was fitted to my car.
×