Jump to content

liambrm

Silver Member
  • Content count

    344
  • Joined

  • Last visited

Community Reputation

0 Neutral

About liambrm

  • Rank
    liambrm
  • Birthday 06/27/1984

Contact Methods

  • MSN
    liam55@hotmail.com
  • Website URL
    http://

General Info

  • Location
    Australia VIC
  • Gender
    Male
  • Interests
    music cars women not necessarily in that order
  • Car Type
    Nissan Silvia
  • Car Model
    1993 180sx
  1. Multiple SR20 parts

    front pipe price?
  2. not that this will be read as its impossible to find but i got my setup to go easy 307rwkw on pump fuel with a hypergear turbo at 24psi just used a good stainless mani and gate on turbine housing now time to go e85 not that this will be read as its impossible to find but i got my setup to go easy 307rwkw on pump fuel with a hypergear turbo at 24psi just used a good stainless mani and gate on turbine housing now time to go e85
  3. Also my last results where on a 38degree dyno cell day made 298 on a 29 degree dyno cell last time
  4. My 265 was with a leaky waste gate. Made good power on stock mani once gate was sorted but couldn't rev out got stuck at 285 at 7000 Made 307 on 26psi at 6200 but it chocked up from there so going back to tubular These results all have a wastegate on the turbine housing
  5. 297 rwkw on internal gate yes will be higher than that soon
  6. turbo really worth it

    gtx2867 gen2
  7. still have the catchcan setup?
  8. absolute beast love to see dyno sheet looks responive.
  9. Twitchy rear end?

    subframe mounting bushes replace with the superpro ones
  10. 2000cc injector e85 kit sr20

    can this all be installed without the extenders on the injectors? have s13 with strut brace that sits close to rocker cover
  11. Valve Float

    porting the gate helps a lot with a bigger flapper
  12. Valve Float

    porting the gate helps a lot with a bigger flapper
  13. Recommendations on intercoolers

    are intercoolers made in queensland are some of the best in the bizz too. i just got a precision one which uses a garrett core. they use to be the best now there new desings as well.
  14. Valve Float

    Make sure exhaust is free flowing as well and turbine housing isn't too small
  15. usually the exhaust and cams will restrict you massively when going for power
×