r31silo

No you cant really KE Dreamer as you run out of thread if you get too big. S13 are 280mm, s14 are 290mm and n16 pulsar are 300mm

PRICE DROP Splitting it up s13 knuckles (modded for extra lock) $250 s14 LCA ball joint boots stuffed $70 s13 hubs $40 r33 gtst front brakes with 4 stud rotors $200 s14 rack ends $50 (brand new, test fitted and too short for new setup) ... 20mm bolt on spacers $70 needs 1 new stud S13 CA stock rims x6, no tyres $90

Splitting it up s13 knuckles (modded for extra lock) $300 s14 LCA ball joint boots stuffed $80 s13 hubs $50 r33 gtst front brakes with 4 stud rotors $200 s14 rack ends $50 (brand new, test fitted and too short for new setup) ... 20mm bolt on spacers $80 needs 1 new stud Buy it all for $500, just need s14 tie rod ends S13 CA stock rims x6, no tyres $100

set of 6 s13 ca stockies $100 S13 modified knuckles (unknown who by) but has lots of lock s13 hubs 4 stud bolt on spacers r33 gtst brakes s14 LCA s14 rack ends (14mm so stronger than s13 standard items $500 just need s14 tie rod ends and have a complete front end upgrade for your s13. Not separating

set of 4 stock ca s13 4 stud rims no tyres $100

Look at the "Trevi" brand machines, they have delongie (sp) internals and relatively cheap. Grinds the coffee for you and all. Very reliable machines with one at my old work lasting for 2 years+ with atleast 40 coffees a day. between 5am and 9am it didnt stop getting abused!

Weezy I have a set of 2jz coilpacks kicking around somewhere.What area are you in?

I have my 1jz gt35r turbo kit for sale GT35R 0.82 rear Custom made manifold by ET in SA Turbosmart 48mm gate oil lines water lines Dump pipe $1300 ono Made 301rwkws on 21psi, 355rwkws on 27-28psi (2 dyno runs only) http://img.photobucket.com/albums/v495/jimmy_mc/DSC00168_zpsecbf4777.jpg[/img]

Price : $850 Condition : New 67mm turbo T4 flange. Garret internals (T04), 360 thust bearing, 90 Degree elbow. rated to 650hp, ceramic costed exhaust housing. 0.81 A/R undivided

This seems to have died?? I know have all corals that survived in my 6ft tank The Red Sea Max 250 is for sale at 1k ono

Import taxes etc and RRP put on products by the big companies for different countries shit me. Good example is getting a new set of runners Asis shoes GT2000 Retail in USA $120 Retail in AUS $189 Same pair of shoes, same manufacturer and both coming from the same place strangely enough. The retail outlets in AUS dont even carry my size or width and wont order it in unless i pay upfront and wait for their next shipment. Or I buy online from the USA, pay $20 postage and have it here quicker and $49 cheaper. What option would you take? Everything I buy I go online for apart from food where I can. Its amazing how much better service and if I call the place up how much more information I get from them about it by a simple call over walking into a shop here getting told utter BS and leaving unhappy after spending $10 on parking in the city to have a shit crowded experience. Plus frieght from China etc to SA is quicker than it is from QLD to SA, GO FIGURE!

Took first 5 corals back to the 3ft tank today, picked up a 4ft as 1 of the holding tanks and currently water testing it. Couldnt think how stressful its becoming to move a 3ft tank and a 6ft tank that are both running :/

Finally Josh. I will be around saturday arvo to push you into getting the sump up and running too

He was just creating the berley, tell him to HTFU and stay out longer lol. I made the gf stay out for 4 hours while she was being sea sick, not misisng fishing time for that weak sauce!

Used to do it alot when the 15 year rule was big. Need vin/ engine number. Make sure you tick mechanical repairs and keep receipts and have bookings else you will get ar se raped now as too many people used to get the permits and drive crazy track cars around Adelaide (outside of designated area's)