Jump to content

GTTR34

Platinum Member
  • Content count

    503
  • Joined

  • Last visited

Everything posted by GTTR34

  1. $4500 s14a 200sx rolling shell

    still available... no one wants a straight body, caged, s14a rolling shell? Might have to keep it and finish it off.
  2. $4500 s14a 200sx rolling shell

    Bump... price is negotiable
  3. 1998 Nissan 200sx - $6,000

    Make : NISSAN 200SX Transmission : Manual Kilometres : 0 Price : $6,000 Condition : Used Hi guys, I've just had my old s14 project car rolling shell interior, engine bay and boot painted and it's for sale. The roll cage cost $3k and is CAMS approved. Perfect for anyone wanting a shell ready to drop in your choice of motor and gear box. Rolling chassis, comes with an sr20det, unknown condition of motor, was running when removed. Comes with S14.5 Origin +25mm conversion fenders, body loom, pedals. Boot lid and tail lights available if buyer wants them, but no use on the shell as the hinges and rear parcel shelf have been cut out. Has got tubs welded in too. No turbo, No headlights, No rear bar, No gearbox. Not registered. Asking price for rolling shell is $6000. Have a few additional parts if buyer wants them with the shell, at EXTRA cost as per below. 5 piece lexan window kit +1000 Fibre glass doors (brand new) +950 Fibre glass "Edge" side skirts (brand new) +250 S14 Origin +50mm rear fenders (brand new) +450 S15 C-west Front bar +400 C-west carbon fibre GT Wing II +1000 Email got_b00st@hotmail.com Also if you are not genuinely interested in buying it, no one wants to read your commentary from the sidelines.
  4. 1998 Nissan 200sx - $6,000

    Make : NISSAN 200SX Transmission : Manual Kilometres : 0 Price : $6,000 Condition : Used BUMP
  5. 1998 Nissan 200sx - $6,000

    Make : NISSAN 200SX Transmission : Manual Kilometres : 0 Price : $6,000 Condition : Used BUMP
  6. 1998 Nissan 200sx - $6,000

    Make : NISSAN 200SX Transmission : Manual Kilometres : 0 Price : $6,000 Condition : Used BUMP
  7. Price : $2,300 Condition : Used 17 x 9 +22 genuine rays wheels getting more rare, not made anymore melbourne pickup or post interstate at your costpics are uploaded here - http://s1116.photobucket.com/albums/k569/jdm7777/
  8. Price : $80 Condition : Used Set of 20 internal drive wheel nuts to suit Volk Racing GT-C's, 1.5 thread type (suits Toyota, subaru.. not for nissan's) Good condition. pickup in melbourne or can post. $80
  9. Price : $1,300 Condition : Used PAIR of SSR Type-C light weight racing wheels with good offsets 17x9.5 +15. These are superlight, weighing only 7.8kg each. this helps with reducing unsprung weight, and improved acceleration out of corners. melbourne pickup preferred, or can post for $50
  10. Price : $120 Condition : Used > Parts are used unless stated brand new > Pickup available from Melbourne, St Kilda/Prahran area > Not willing to post large/heavy/fragile items interstate (unless you arrange your own courier) > Buyers in Australia only - no international inquiries thanks > NOT interested in swapping any parts Photos of most items here, email me if not - http://s1116.photobucket.com/albums/k569/jdm7777/ Email got_b00st@hotmail.com New parts: Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120 S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180 S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250 S14.5 Origin +25mm conversion fenders (brand new) $450 S14 Origin +50mm rear fenders (brand new) $450 S14 light weight fibreglass doors (brand new) $900 S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,050 S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100 used parts: Greddy engine oil cap $40 S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550 S15 factory rear boot spoler with led's, pewter colour $120 S15 JDM factory steering wheel with airbag $250 S15 Hybrid aluminium radiator $250 S15 Stage21 aero front bar (painted blue) $350 S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300 S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3500 (new price from PWR is $4300) S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700 C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100 Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,750 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body).. save over $800 off new prices HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300 STACK 8130 dash with sensors and loom $1,800 ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono R34 GTR Cusco Type-40 aluminium strut tower brace $240 R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750 R34 GTR C-west carbon fibre cannards for N1 bar $350 R34 GTR Nismo dash cluster (black version) (brand new) $700 R34 GTR/GTT Nismo GT LED tail lights $1,200 4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1300 firm RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,200 firm RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800 RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000 SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100 ** can post wheels interstate if needed at buyers cost **
  11. Price : $120 Condition : Used > Parts are used unless stated brand new > Pickup available from Melbourne, St Kilda/Prahran area > Not willing to post large/heavy/fragile items interstate (unless you arrange your own courier) > Buyers in Australia only - no international inquiries thanks > NOT interested in swapping any parts Photos of most items here, email me if not - http://s1116.photobu...s/k569/jdm7777/ Email got_b00st@hotmail.com New parts: Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120 S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180 S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250 S14.5 Origin +25mm conversion fenders (brand new) $450 S14 Origin +50mm rear fenders (brand new) $450 S14 light weight fibreglass doors (brand new) $900 S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,050 S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100 used parts: Greddy engine oil cap $40 S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550 S15 factory rear boot spoler with led's, pewter colour $120 S15 JDM factory steering wheel with airbag $250 S15 Hybrid aluminium radiator $250 S15 Stage21 aero front bar (painted blue) $350 S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300 S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3500 (new price from PWR is $4300) S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700 C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100 Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,750 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body).. save over $800 off new prices HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300 STACK 8130 dash with sensors and loom $1,800 ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono R34 GTR Cusco Type-40 aluminium strut tower brace $240 R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750 R34 GTR C-west carbon fibre cannards for N1 bar $350 R34 GTR Nismo dash cluster (black version) (brand new) $700 R34 GTR/GTT Nismo GT LED tail lights $1,200 4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1300 firm RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,200 firm RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800 RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000 SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100 ** can post wheels interstate if needed at buyers cost **
  12. Price : $1,000 Condition : Used > Parts are used unless stated brand new > Pickup available from Melbourne, St Kilda/Prahran area > Not willing to post large/heavy/fragile items interstate (unless you arrange your own courier) > Buyers in Australia only - no international inquiries thanks > NOT interested in swapping any parts Photos of most items here, email me if not - http://s1116.photobucket.com/profile/jdm7777 Email got_b00st@hotmail.com New parts: Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120 S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180 S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250 S14.5 Origin +25mm conversion fenders (brand new) $450 S14 Origin +50mm rear fenders (brand new) $450 S14 light weight fibreglass doors (brand new) $900 S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,050 S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100 used parts: Greddy engine oil cap $40 S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550 S15 factory rear boot spoler with led's, pewter colour $120 S15 JDM factory steering wheel with airbag $250 S15 Hybrid aluminium radiator $250 S15 Stage21 aero front bar (painted blue) $350 S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300 S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3500 (new price from PWR is $4300) S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700 C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100 Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,750 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body).. save over $800 off new prices HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300 STACK 8130 dash with sensors and loom $1,800 ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono R34 GTR Cusco Type-40 aluminium strut tower brace $240 R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750 R34 GTR C-west carbon fibre cannards for N1 bar $350 R34 GTR Nismo dash cluster (black version) (brand new) $700 R34 GTR/GTT Nismo GT LED tail lights $1,200 4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1300 firm RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,200 firm RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800 RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000 SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100 ** can post wheels interstate if needed at buyers cost **
  13. Lay flat trailers

    If you have a 180sx or sil that isn't overly modified, the trailer would cost more than the car is worth lol. I'm looking at getting a nevco or lay flat trailer.. sucks nevco are interstate. layflat use airbag suspension which is nice and soft.... either one will cost you minimum $11-13k
  14. Price : $120 Condition : Used > Parts are used unless stated brand new > Pickup available from Melbourne, St Kilda/Prahran area > Not willing to post large/heavy/fragile items interstate (unless you arrange your own courier) > Buyers in Australia only - no international inquiries thanks > NOT interested in swapping any parts Photos of most items here, email me if not - http://s1116.photobu...s/k569/jdm7777/ Email got_b00st@hotmail.com New parts: Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120 S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180 S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250 S14.5 Origin +25mm conversion fenders (brand new) $450 S14 Origin +50mm rear fenders (brand new) $450 S14 light weight fibreglass doors (brand new) $900 S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,050 S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100 used parts: Greddy engine oil cap $40 S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550 S15 factory rear boot spoler with led's, pewter colour $120 S15 JDM factory steering wheel with airbag $250 S15 Hybrid aluminium radiator $250 S15 Stage21 aero front bar (painted blue) $350 S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300 S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3500 (new price from PWR is $4300) S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700 C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100 Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,750 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body) HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300 STACK 8130 dash with sensors and loom $1,800 ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono R34 GTR Cusco Type-40 aluminium strut tower brace $240 R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750 R34 GTR C-west carbon fibre cannards for N1 bar $350 R34 GTR Nismo dash cluster (black version) (brand new) $700 R34 GTR/GTT Nismo GT LED tail lights $1,200 4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1400 RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,300 RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800 RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000 SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100 ** can post wheels interstate if needed at buyers cost **
  15. Your car - what's happening?

    my s15 has had a bit of work done lately.... should be finished in a few more weeks. Roll cage, new paint, lexan windows, new turbo setup... oh yeah!!
  16. yes it is. i've done it once, but i'd rather pay someone else to do it than do it myself again..
  17. Yes Daniel, I am talking about the rear housing. lol @ bon jovi.
  18. are u able to make these with a vband flange?
  19. Price : $2,500 Condition : Used RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres $2,500 ono prefer melbourne pickup can freight interstate email got_b00st@hotmail.com HEAPS of quality brand parts also for sale here - http://nissansilvia.com/forums/index.php?showtopic=514507
  20. Your car - what's happening?

    Looking good Kemp, that dash is boss Definitely go with a splitter frame design directly attached to the chassis, it's the most functional way to transfer downforce to the front end. Good luck getting it all done this weekend!
  21. That looks tuff, so clean. Are they varrstoen's? I'm getting my s15 resprayed in arctic white with black lmgt4s soon How much rear camber do you have and what size tyes?
×