Search the Community
Showing results for tags 'onevia 180sx silvia s13 sr20'.
Found 1 result
Hey all, Name's Alex. Recently came into possession of a Onevia Pretty rough car, needs a fair tidy up. Bought it as follows Black s13 shell with 180sx SR front, (NA auto SR shell). Redtop SR20DET Manual Carbon Fibre bonnet and boot S14 five stud and brakes all round Shit paint. Other than that it's dead stock with heaps of corners cut by whoever slapped it together. The plan for the car will be setting it up as an entry level track car mainly to be used for Competitve Hillcimb, Targa and an event we have in SA called "OzGymkhana" as well as non competitive drift. Over the last couple of weeks I've just been tidying it up a bit -Replacing broken switches -Installed Digital Climate Control -Bolted rear seatbelts and shit Have been going over everything finding the most ridiculous shit such as bolts on strut top/tower loose, sway bar links cross threaded. Always thought the car was a bit slow (but just assumed these aren't super quick stock) but whilst trying to work out a headlight wiring issue I noticed a vacuum line not connected, traced it back to the find it was the BOV reference line so it's pretty much always been open, which funnily enough was quite lucky as I found the actuator reference line also wasn't hooked up. Also when driving I'd found a some what burning smell. Find today that the (forget what it's called) EGT or whatever that emission thing is which connects to your exhaust, the 'hose' for it was completely rucked and burning so blocked and deleted it. Drove it afterwards and through an old boost gauge in to make sure everything was in good order, running on about 10psi (according to the gauge which I think is a bit out - what is stock boost?) and really seems to pick up. So far collected for it I have a few parts from my old hillclimb car and some others lined up -Wideband O2 -Sparco Sprint fixed back -Extinguisher -Dump pipe in postage -Front pipe/full exhaust waiting for seller to come to Adelaide to drop off Shit to have in it over the next few months Front mount Coilovers Adjustable arms T28bb but might go bigger 4:30 stock LSD SR front bar extensions The purpose of this thread is mainly just to ask a tonne of questions and hopefully get some answers, if anyone has any parts they want to sell let me know. Few questions to start with -The low beams currently don't work, for when driving at night I just have the head lights partly wound down (pointed at ground) and hi beams on. No blown fuses etc. Checked the wiring today with a multimeter as well as properly soldered it as it was just shittly crimped before. But can't seem to work out why it's doing it, I assume it's to do with going from 2 globes -> 1 globe for the 180sx front (chucked a new globe in to see if that was causing it which it isn't). Does anyone know what's likely causing this? if there's a proper way to wire it up etc? Really want to fix it on the ASAP. (parkers also and wired in). -Anyone have advice on wiring up the motors for the flip headlights, as far as I know all the mechanics are there. I assume the best way is just hard wire it to a switch, anyone have a guide or anything?