Search the Community
Showing results for tags 'weld-on fittings'.
Found 1 result
Hi, First of all i am a novice when it comes to fabrication and welding. I did have a quick google but the results i got i did not understand, i am learning and not sure who to ask so thought i would throw a topic up here. I bought a custom stainless intake manifold for my CA18DET. I did not realise at the time of purchase but it does not have sufficient vacuum fittings as the previous owner had binned the idle air control setup (AAC and Air regulator). I want to run this as it will be street driven and occasional track use. I am making a custom bracket with steel plate to mount the AAC and air regulator (mild steel for bracket). So i don't have to modify the AAC i am planning on using weld-on fittings welded to the bracket and weld on fittings on the stainless manifold. I don't have the right gear to weld to stainless so I am going to get someone to weld the fittings on for me (not sure who yet but there are a couple of performance shops in the area I can contact when i have all the parts) I need to purchase weld on barb fittings 4x 3/8" and 1x 1/2" fittings. When i look at the proflow website they have both steel and alloy fittings. http://www.proflow.com.au/catalog/7227 2x of the 3/8" fittings and the 1/2" fitting will be welded to the stainless manifold 2x of the 3/8" fittings will be welded to the mild steel bracket (i beleive the steel fittings are obvious choice for these but want to confirm) Which ones do I get? Thanks