Jump to content
Sign in to follow this  
180BoY

How to install a Bosch 040 into S13/180sx

Recommended Posts

I have made this guide in a printable form so anybody can get a copy.

Check it out and if you have any questions feel free to pm me.

Remember this is a guide only!

 

I love PDF

Fuel_pump_install.pdf

Share this post


Link to post
Share on other sites

great write up mate. i can do everything there except the wiring part (the extra step), is that necessary to do on an s15? Because i prefer to use the bosch pump instead of the walbro.

Share this post


Link to post
Share on other sites

Ive just completed this today, big thanks to 180boy for the 'how to'.

 

couple things i came across:

 

make sure that the screw for the ring clamps (holding the pump to the bracket) are as close to the bracket as possible, other wise they will hit the side of the resovoir (?) and wont sit in proper.

 

the extra wiring isnt really needed, just cut the red/blue wire at the loom connection and ground it, this removes the inline resistor.

 

make sure u depressurise the tank first!!! :yes::blush:

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×