Jump to content
Sign in to follow this  
5U5PECT

thrust bearing in EG civic needs reaplcing

Recommended Posts

as title says im thinkin of buying a eg vtec civic 2moro that needs a new thurst bearing... how much is this gonna cost?

 

 

Share this post


Link to post
Share on other sites

You mean input shaft bearing? If that's what you're talking about then you'll probably be looking at $500+

Share this post


Link to post
Share on other sites

Its more the labour that will cost you to replace the thrust bearing.

 

Does your clutch need replacing?

Share this post


Link to post
Share on other sites

You might want to register at ozhonda mate. They will give you better advice.

Share this post


Link to post
Share on other sites

You might want to register at ozhonda mate. They will give you better advice.

 

I'm sorry, how? <_>

 

 

 

A thrust bearing is a thrust bearing.

 

It maybe FWD - but still the thrust bearing itself is not an expensive item.

 

The clutch needs to come out in order to replace it - therefore labour costs will be expensive.

Share this post


Link to post
Share on other sites

You might want to register at ozhonda mate. They will give you better advice.

 

I'm sorry, how? <_<

 

 

 

A thrust bearing is a thrust bearing.

 

It maybe FWD - but still the thrust bearing itself is not an expensive item.

 

The clutch needs to come out in order to replace it - therefore labour costs will be expensive.

 

 

 

Go to www.ozhonda.com and sign up there. Better advice for Hondas.

 

To replace the bearing the gearbox needs to come off. To ensure that it doesn't wear down quickly after being replaced all of the internals of the box needs to be removed and individually cleaned to ensure there is no sediment remaining, otherwise the bearing will wear very quickly and you'll most likely find yourself replacing it 6 months later.

 

This is where the cost comes from, and generally I think it's around the $400-500 mark for somebody to remove your box and put it on again.

Share this post


Link to post
Share on other sites

You might want to register at ozhonda mate. They will give you better advice.

 

I'm sorry, how? <_>

 

 

 

A thrust bearing is a thrust bearing.

 

It maybe FWD - but still the thrust bearing itself is not an expensive item.

 

The clutch needs to come out in order to replace it - therefore labour costs will be expensive.

 

 

 

Go to www.ozhonda.com and sign up there. Better advice for Hondas.

 

To replace the bearing the gearbox needs to come off. To ensure that it doesn't wear down quickly after being replaced all of the internals of the box needs to be removed and individually cleaned to ensure there is no sediment remaining, otherwise the bearing will wear very quickly and you'll most likely find yourself replacing it 6 months later.

 

This is where the cost comes from, and generally I think it's around the $400-500 mark for somebody to remove your box and put it on again.

 

blah blah blah - go to OzHonda's yeah, but still cars are cars - its a simple question - he wasn't asking what site to join up.... <_>

 

 

Anyway Question answered.

Share this post


Link to post
Share on other sites

You might want to register at ozhonda mate. They will give you better advice.

 

I'm sorry, how? <_<

 

 

 

A thrust bearing is a thrust bearing.

 

It maybe FWD - but still the thrust bearing itself is not an expensive item.

 

The clutch needs to come out in order to replace it - therefore labour costs will be expensive.

 

Maybe because he drives a Honda. Nothing to do with the current question being asked. Ozhonda has useful information that he might benefit from.

Share this post


Link to post
Share on other sites

You might want to register at ozhonda mate. They will give you better advice.

 

I'm sorry, how? <_<

 

 

 

A thrust bearing is a thrust bearing.

 

It maybe FWD - but still the thrust bearing itself is not an expensive item.

 

The clutch needs to come out in order to replace it - therefore labour costs will be expensive.

 

 

 

Go to www.ozhonda.com and sign up there. Better advice for Hondas.

 

To replace the bearing the gearbox needs to come off. To ensure that it doesn't wear down quickly after being replaced all of the internals of the box needs to be removed and individually cleaned to ensure there is no sediment remaining, otherwise the bearing will wear very quickly and you'll most likely find yourself replacing it 6 months later.

 

This is where the cost comes from, and generally I think it's around the $400-500 mark for somebody to remove your box and put it on again.

 

blah blah blah - go to OzHonda's yeah, but still cars are cars - its a simple question - he wasn't asking what site to join up.... <_<

 

 

Anyway Question answered.

 

 

 

My post was useful. Your's was pretty much pointless, not constructive or beneficial to the thread at all.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×