Jump to content
Sign in to follow this  
cjmotor

Forced Perforamnce turbo Charger evo 4-9 (green-red- black )anti surge 84mm

Recommended Posts

Forced Performance Turbochargers have taken the EVO community by storm, often providing little if any trade off of response for power, lots of it

 

Forced Performance turbos are made in the USA and come with 12 months warranty

 

all instock in australia no more waiting

 

we match all price

please pm us

 

 

FP green turbo evo 4-9 selling $2550+35 shipped

 

The FP GREEN is the most responsive* bolt on turbocharger in the FP range available for the EVO 4-9. It features a 54lb/min 73mm HTA compressor wheel and a new 65mm revision of the high efficiency turbine wheel used in the FP RED for the perfect combination of power and rapid spool.

Compressor Inducer diameter: 52.6mm

Capable of up to 280kW at the wheels with supporting modifications

*As responsive as a standard turbo

 

 

 

 

FP RED Turbo: EVO 4-9 selling $2700+40 shipped

 

The FP RED offers serious power whilst keeping response down low for those past the entry level modifications stage. The larger inlet configuration helps reduce huffing and surging sounds that are often reported with larger stock format hybrids when lugging the engine at low RPM and high boost pressure, but perhaps even more useful is the way it helps feed the splitter blades of the compressor wheel resulting in increased flow. This larger inlet also increases the volume of the intake air pipe and reduces vacuum at the inlet of the turbo.

Note * 3” intake pipe recommended

Typical boost threshold about 3700rpm depending on camshaft selection and other variables.

Compressor Inducer Diameter 54.8mm

Full boost expected at around 3700rpm depending on supporting modifications and cam combination

Capable of over 320kW / 440hp at the wheels on a built engine

 

FP black evo 4-9 $2950+40 shipped

 

The FP BLACK is the most fully evolved stock appearing variant we offer. It features an 82mm HTA compressor wheel with a flow rate of 68lb/min with our 84mm Flow Advancement compressor cover. The turbine side features a large 67mm turbine wheel.

All FP Black’s come standard with a 25psi wastegate actuator and FP’s Evo Oil Filter Housing Line Kit.

Compressor Inducer Diameter 59.1mm

Capable of over 400kW / 500hp at the wheels on a built engine

 

!

evo red 4-9.jpg

evo green 4-9.jpg

evo black 4-9.jpg

Share this post


Link to post
Share on other sites

:stretcher:

 

all instock

 

 

Forced Performance Turbochargers have taken the EVO community by storm, often providing little if any trade off of response for power, lots of it

 

Forced Performance turbos are made in the USA and come with 12 months warranty

 

all instock in australia no more waiting

 

we match all price

please pm us

 

 

FP green turbo evo 4-9 selling $2550+35 shipped

 

The FP GREEN is the most responsive* bolt on turbocharger in the FP range available for the EVO 4-9. It features a 54lb/min 73mm HTA compressor wheel and a new 65mm revision of the high efficiency turbine wheel used in the FP RED for the perfect combination of power and rapid spool.

Compressor Inducer diameter: 52.6mm

Capable of up to 280kW at the wheels with supporting modifications

*As responsive as a standard turbo

 

 

 

 

FP RED Turbo: EVO 4-9 selling $2700+40 shipped

 

The FP RED offers serious power whilst keeping response down low for those past the entry level modifications stage. The larger inlet configuration helps reduce huffing and surging sounds that are often reported with larger stock format hybrids when lugging the engine at low RPM and high boost pressure, but perhaps even more useful is the way it helps feed the splitter blades of the compressor wheel resulting in increased flow. This larger inlet also increases the volume of the intake air pipe and reduces vacuum at the inlet of the turbo.

Note * 3” intake pipe recommended

Typical boost threshold about 3700rpm depending on camshaft selection and other variables.

Compressor Inducer Diameter 54.8mm

Full boost expected at around 3700rpm depending on supporting modifications and cam combination

Capable of over 320kW / 440hp at the wheels on a built engine

 

FP black evo 4-9 $2950+40 shipped

 

The FP BLACK is the most fully evolved stock appearing variant we offer. It features an 82mm HTA compressor wheel with a flow rate of 68lb/min with our 84mm Flow Advancement compressor cover. The turbine side features a large 67mm turbine wheel.

All FP Black’s come standard with a 25psi wastegate actuator and FP’s Evo Oil Filter Housing Line Kit.

Compressor Inducer Diameter 59.1mm

Capable of over 400kW / 500hp at the wheels on a built engine

 

!

Share this post


Link to post
Share on other sites
Sign in to follow this  

×