Jump to content
Sign in to follow this  
DriftGTS

Local CARS for sale

Recommended Posts

That is a normal price for a 4age coupe, saw it in belco on the weekend, mad jelly! very clean :)

Share this post


Link to post
Share on other sites

looking to upgrade so the 180 is available.

Built SR20DET with rb25 gearbox and one piece tailshaft

270rwkw on 20psi with plenty of more left with more boost.

Manley rods

Mahle pistons

GT30

turbosmart 38mm external gate and fpr

autometer gauges oil pressuer, volts, oil temp and boost

eboost2

apexi power fc

bc racing coilovers

greddy baffled sump

exedy 3 puk clutch

 

and i have probably forgotten some things.

 

Contact Troy on 0403 131 921 for any questions

 

May swap for road bike, skyline r33 or anything of interest so let me know what you got.

 

$13000 ono

IMGP6563.JPG

IMGP6564.JPG

IMGP6565.JPG

IMGP6566.JPG

IMGP6567.JPG

IMGP6568.JPG

IMGP6569.JPG

IMGP6570.JPG

IMGP6571.JPG

IMGP6572.JPG

Edited by YLD500

Share this post


Link to post
Share on other sites
looking to upgrade so the 180 is available. Built SR20DET with rb25 gearbox and one piece tailshaft 270rwkw on 20psi with plenty of more left with more boost. Manley rods Mahle pistons GT30 turbosmart 38mm external gate and fpr autometer gauges oil pressuer, volts, oil temp and boost eboost2 apexi power fc bc racing coilovers greddy baffled sump exedy 3 puk clutch and i have probably forgotten some things. Contact Troy on 0403 131 921 for any questions May swap for road bike, skyline r33 or anything of interest so let me know what you got. $13000 ono

 

can the bonnet return to stock??

Share this post


Link to post
Share on other sites

There is a hole under the scoop so would need to put a rubber around the hole but easier to get new bonnet

Share this post


Link to post
Share on other sites

Hey,

 

So up for possible sale is my 92 two tone Silvia.

 

ITs got:

- Black top Sr20det

- POD filter

- Blitz BOV

- Blitz FMIC

- Blitz Dual SBC Boost controller

- 3inch stainless exhaust and GKTech dump pipe

- Sparco Seat

- Tein Camber Tops

- 300zx turbo front brakes and slotted rotors

- VLSD

- Rear subframe 'pineapples'

 

I am currently about 75% through a manual conversion.

 

I have put in a new Extreme organic clutch, new master and slave cylinders, replaced front and rear main seals.

 

I have recently serviced the car and used Motul 300v oil in the gearbox and turbo light for the engine.

 

Link to abit of the build http://forum.jdmstyl...JDM-1992-Silvia

 

Car does not currently run as i havent finished the conversion just yet so theres still a few things to go. I will be doing as much as i can over the next few weeks but the reason im looking at selling is i dont have as much time or money as i use to and feel bad having the car just sitting there doing nothing.

 

Im looking for about $5500 - $6000

 

Feel free to contact me on 0415890205 if you want to have a look or have any questions. I can also pay for 3 months rego sometime between now and the end of November if needed

 

Thanks Blake

 

FYI its a blacktop S13 engine, not the VCT S14/S15 engine which is the classic "black top" engine people often refer to. Pitty your selling it so soon, not that long ago you popped up on here having just bought it.

Edited by hipcrostino

Share this post


Link to post
Share on other sites

Yeh sorry S13 blacktop. Yeh decided to stick it out and just make time to finish it!!

Share this post


Link to post
Share on other sites

HEY GUYS... have a

 

2002 holden astra, need it gone asap!!

blue,auto, low kms (126k) good nic

a/c and all the rest,,,

 

REASON for sale...

it is my mother-in-laws are she got a new car so...

 

any offer around 4.4K

 

DO IT!!

Share this post


Link to post
Share on other sites

White Datsun 1200 sedan

 

4 speed manual

 

24665.jpg

 

24664.jpg

 

24663.jpg

 

just changed the spark plugs,oil,filter,gearbox oil also had the steering box tightened

Recently ran out of rego because i purchased another car

Car has a passed roadworthy certificate so it can be registered directly in your name or i can put more registration on at your cost.

 

car is original apart from the steering wheel, immobiliser and floor mats.

 

This car is a very cheap car to run and own.

 

Price $5350 or swap for parts for my S13,

looking for a engine/gearbox/diff package

 

Pm for more details

Share this post


Link to post
Share on other sites

would you be interested in swapping for a black top sr20, new head gasket, arp head studs, screamer pipe (so also have the stock dump) s15 turbo, gearbox clutch etc wiring loom and ecu from a s14

Share this post


Link to post
Share on other sites

think its time i upgraded...

 

blue/green pearl s13, its got a SR20DE manual with no mods apart from cruise control and exhaust (as far as i know).

 

has 300,000 on teh clock but still runs and drives better than you would expect for the k's

 

clean interior with momo steering wheel and new headdeck n speakers.

 

wheels are weds sport rs-5's pretty sure they are 17x8 35 front, 17x9 38 rear, 4x100/114.3 tyres are Bridgestone PZ1 235/45 front and 255/40 rear.

 

paint isnt in best condition and alternator belt just started slippin on startup only

 

probably forgot a few things but o well.

 

i want $4000 without wheels or $4500 with em. pretty firm on price.

 

pm if intersted

silvia rims 3.jpg

silvia rims 2.jpg

07112010093-001.jpg

Share this post


Link to post
Share on other sites

I'm pondering the idea of selling my car and changing to a S14. Just seeing if there is any interest.

 

Specs/Mods:

 

Nissan S13 Silvia Q

1991 (I think)

 

207,000 kms on chassis

 

Vertex Body Kit (I think)

Re-sprayed metallic blue but not very good

S14 Engine (100,000 kms at a guess)

S14 Gearbox

HKS exhaust manifold

3 inch exhaust - Rego legal

Xforce Hiflow cat

Front Mount in Engine bay

Triple core Koyo Rad

Neo Tech Castor arms

Harderned Extra lock Tie Rods

Adjusted Tie Rod ends

T28 turbo (possibly BB, 6 bolt)

10psi adjustable actuator

Walbro

Guages (Drift brand, EL boost, volts and oil temp)

BC Coilovers

Braided turbo lines

GKTech Dump pipe

17x7 rims with Federals (RSR front, 595 rear)

Project Mu Rear Brake pads

Pioneer Bluetooth/USB/Aux/CD head unit

Shimmed VLSD

Non-Hicas cradle

RPM Heavy duty pressureplate

Steering rack was rebuilt start of last year (I think)

 

Bad points

- It's a drift car, front bar has cracks, clear coat on front bar pealing, rear bar has a crack from bottoming out and the guards have dents from bottoming out.

- Brake master cylinder needs replacing, I will do that soon, then it will become a good point

- Banana seats

- No rear speakers

 

Good points

- The car passed Dickson start of this year

- Handles awesome

- I guess you could say it's setup for drifting

- No rear speakers

 

Asking $7,000

If you want the rims on the car at the moment (different to photos, 17x8, 17x9) $8,000.

If you want a S13 wreck as well (spare coilovers, hubs, knuckles, non-hicas cradle, custom interior) add another $1,000.

Also have a Stereo system to suit for $600.

 

I don't really care about how the car looks so I rarely clean it. I will wipe it down and take some more appealing photos :)

 

405907_10150521854582816_1892027962_n.jpg

 

403279_10150521855572816_634703199_n.jpg

Edited by Stinkypoo

Share this post


Link to post
Share on other sites

Hey,

 

So i think i'll put 92 two tone Silvia up for sale and if it sells great if not thats all good. Body and interior are in good condition. Interior has no rips or tears or cracks in the dash. The only problem with the body is the passenger rear had something dent it just near the rear light.

 

ITs got:

- Black top Sr20det

- POD filter

- Blitz BOV

- Blitz FMIC

- Blitz Dual SBC Boost controller

- 3" stainless front pipe with 3" straight through and GKTech dump pipe

- Sparco Seat

- Tein Camber Tops

- 300zx turbo front brakes and slotted rotors

- VLSD

- Rear subframe 'pineapples'

- Extreme Organic Clutch

- New clutch mast and slave cylinders

- New o2 sensor

- GKTech RAS

- New tyres all round

 

I have recently done a manual conversion.

 

Recently replaced front and rear main seals.

 

I have recently serviced the car and used Motul 300v oil in the gearbox and turbo light for the engine.

 

Im looking at selling is i dont have as much time or money as i use to and feel bad having the car just sitting there doing nothing.

 

Im looking for about $6000 or swaps for unmodified S14, ae86, ke70 or something of interest. Can also come with ACT rego and passed rego check when i brought it with ease.

 

Feel free to contact me on 0415890205 if you want to have a look or have any questions located in Gungahlin Canberra

Thanks Blake

Untitled.jpgIMG_0350.jpg

SDC10763.jpgphoto.jpg

Share this post


Link to post
Share on other sites

1989 S13 CA18DE Auto 157,000k

 

Rego till 29/9/2012

 

I purchased the car from a middle aged woman about 6 months ago with the intention of doing a LS1 conversion but my priority have changed. i have been fixing little things slowly to obtain a roadworthy certificate so all i need to do now is a new tire and brake pads. The water pump seems to be weeping and also the overdrive button is missing so it would need minor work if it was going to be used as is. This is a perfect platform to build from

 

* looking for $2800 as is or $3200 with a new tire,brake pads and a passed roadworthy certificate.

 

IMG_1048.jpg

 

IMG_1050.jpg

 

IMG_1095.jpg

Share this post


Link to post
Share on other sites

Spotted a black 180SX for sale today in a carpark in Belconnon. Took some basic pics, but won't post them here. It looks to be in ok condition, no visible damage. Has the usual badly fitted body kit rocking stock wheels. It has $6000 written on the front, $7000 on the rear and "make and offer" on the side. If it's an SR20 model (not sure if it is or not) I wouldn't offer more than 5k from what I've seen on the outside. Who knows though, might be fairly modified. Inside looked ok, plenty of gauges and controllers and stuff. No cracks in the dash, although I didn't look very hard.

 

As a car, it could be a good starting point for someone. PM me if you want pics (I just can't be arsed putting them on the net).

 

Number on the back of it is 0450442040 - Rego is ACT YEP-28Q

Share this post


Link to post
Share on other sites

EDIT: Car has been sold. Deposit received.

Edited by Jero86

Share this post


Link to post
Share on other sites

00 honda civic sedan

 

as above,have my daily civic to sell.its a great car,super reliable.there was only 1 previous owner and has nearly full log book service history.its auto.motor is mint,no oil leaks or anything.tyres are all good and needs nothing.front guard,wing,and bonnet are different colour due to 4wd reversing into it.hasnt bothered me..

 

selling cheap at 2850,looking for quick sale..8months vic rego included.

 

0458102721

 

 

 

54022515-BB7F-454A-96C4-245162553831-796-000000D4C8AC2C17.jpg

E4ECC434-1D76-418E-81BC-DE13F7CE6364-796-000000D4D8355554.jpg

9B3B8BAA-51EA-4395-8A69-5E9A161D17B3-796-000000D4EA4C01F2.jpg

BC45F7BA-9950-4B5C-BA61-1916E3D46AF4-796-000000D5249909E5.jpg

81CC7313-7262-4443-A687-3A87FD93B668-796-000000D53236BA66.jpg

51D24458-F3AD-40ED-8831-1F5298FCD983-796-000000D53E687A08.jpg

Share this post


Link to post
Share on other sites

Buyer fell through on this :S so im up for selling it again... car hasnt left the garage for the last 6 months as i am still unwell.

 

Selling my S13 project i have been working on. $6500 ONO or trade for R32 skyline

 

Have become quite sick and cannot complete due to no funds or time.

 

Imported S13 previously registered in ACT rego has run out though.

 

Currently has a Redtop nonvct sr20 with a midmount GT3076 garret turbo rebuilt by GCG 3" from dumb back (no upgraded ECU so will need one to make it run smoothly). Not 100% sure on km's on motor but runs realy well. Automatic gearbox. Can organise a conversion kit for $1000 as that was my plan.

 

Brand new ISC tube and fin intercooler kit $500 have receipts.

 

Replaced suspension with CS2 coilovers, Driftworks rear camber arms, tein tie rods and ends, driftworks front lower control arms and Driftworks geomaster tension rods. Cost almost 2.5k posted from uk through cartell australia. seen maybie 50km has all been tightened and has had a wheel alignment and is sitting at stock hight for rego. Not 100% sure on the diff but replaced the rear cradle recently and currently has hicas.

 

Comes with a pair of 17x9+7 Work Vs-xx in gunmetal grey and 2 random 17x7.5 on the rear. All tyres have 90% tread and good for rego.

 

Recently resprayed Commodore Voodoo blue from the VY/VE. needs to be cut back and polished though. Have enough paint to respray the car again.

 

Have the stock front and rearbar not sprayed in the original silver and have a vertex front and rear sprayed but not fitted.

 

Txt for photos or an inspection. Suits a drift car due to extensive suspension work has massive lock! but could also make an awsome streeter.

 

0400870530

 

Thanks,

Nick

Share this post


Link to post
Share on other sites

Hey Peeps,

 

Selling a 1999 Honda Prelude

 

H22A N/A

152xxxkms

AUTO

in Light blue

 

59032_4467513519292_807183317_n.jpg

 

Only needs a front bar which i sold to a mate thinking i will pull the engine out for a project car but lost interest.

 

Car can have rego but that is not something I want to deal with I just want to get rid of the car honestly

 

$4,000 ono

 

Pm if you have any inquiries

 

And yes i know its not a silvia lol

Share this post


Link to post
Share on other sites

Thinking about selling my R32 as a rolling shell (no engine, gearbox or diff). It will however come with another RB20DET, gearbox and diff with the sale. Not very pretty because I've been using it for drifting, but R32's look so cool.

 

It does have on it:

- Adjustable castor rods

- HSD coilovers but one dampener needs a rebuild (bound feels like it's blown out).

- Has Potenza front struts because of the coilover problem

- DVD player and motorised touch scren (1 DINN)

- Project Mu front brake pads

- Bosch 040 intank pump with relay from battery

- 2.5 months rego

- Hicas lock bar

- GTR rear cradle (suspension knuckles)

 

It will also come with separate:

- Original RB20DET (I was running a RB25)

- RB20 gearbox

- VLSD

- Flywheel, HD clutch/pressure plate.

 

After $2500, I think I can wreck it down for the same price. If you're after parts let me know and I'll consider wrecking it down sooner if I have enough interest. I might even put a RB30 into it in the mean time.

 

EDIT: No pics of it at the moment, any that I do have I don't want to post :P.

Edited by Stinkypoo

Share this post


Link to post
Share on other sites

Posting for a Mate

____________________________________________________________________________________

Restored HQ Kingswood wagon. 308 with 15800k since rebuild.

 

3 speed Trimatic auto. Power steering. CD player. Resprayed to matched aqua green. New carpets, interior like new.

 

Twin 2 1/4 inch triY exhaust. Cooling system overhaul with new water pump, 4 core triple flow radiator, shroud and plastic fan (crankshaft).

 

12 months rego. Minimum rust. Great Sunday drive vintage, also suit someone willing to continue restoration.

 

$8000

 

Contact Michael on (0402267803) Or Email on croninmp@gmail.com

 

 

Located in Bungendore

 

100_7105.JPG

Edited by the_moose

Share this post


Link to post
Share on other sites

I'm selling my mum's 2006 Toyota Corolla Ascent, please send me a PM if you are interested or might know someone who is.

Thanks

P1000898.jpg

Share this post


Link to post
Share on other sites

Thinking about selling my R32 as a rolling shell (no engine, gearbox or diff). It will however come with another RB20DET, gearbox and diff with the sale. Not very pretty because I've been using it for drifting, but R32's look so cool.

 

It does have on it:

- Adjustable castor rods

- HSD coilovers but one dampener needs a rebuild (bound feels like it's blown out).

- Has Potenza front struts because of the coilover problem

- DVD player and motorised touch scren (1 DINN)

- Project Mu front brake pads

- Bosch 040 intank pump with relay from battery

- 2.5 months rego

- Hicas lock bar

- GTR rear cradle (suspension knuckles)

 

It will also come with separate:

- Original RB20DET (I was running a RB25)

- RB20 gearbox

- VLSD

- Flywheel, HD clutch/pressure plate.

 

After $2500, I think I can wreck it down for the same price. If you're after parts let me know and I'll consider wrecking it down sooner if I have enough interest. I might even put a RB30 into it in the mean time.

 

EDIT: No pics of it at the moment, any that I do have I don't want to post :P.

 

 

R32 forsale price without particular bits:

 

Rolling shell - $1700

- Adjustable castor rods

- HSD coilovers but one dampener needs a rebuild (bound feels like it's blown out).

- Has Potenza front struts because of the coilover problem

- DVD player and motorised touch scren (1 DINN)

- Project Mu front brake pads

- Bosch 040 intank pump with relay from battery

- 2.5 months rego

- Hicas lock bar

- GTR rear cradle (suspension knuckles)

- 3 Inch Cat Back exhaust

 

Rolling shell with gearbox & Diff - $2200

- Adjustable castor rods

- HSD coilovers but one dampener needs a rebuild (bound feels like it's blown out).

- Has Potenza front struts because of the coilover problem

- DVD player and motorised touch scren (1 DINN)

- Project Mu front brake pads

- Bosch 040 intank pump with relay from battery

- 2.5 months rego

- Hicas lock bar

- GTR rear cradle (suspension knuckles)

- 3 Inch Cat Back exhaust

- RB20 Gearbox

- VLSD

- Flywheel, HD Clutch/pressureplate

 

Rolling shell with Engine, gearbox & Diff - $2800

- Adjustable castor rods

- HSD coilovers but one dampener needs a rebuild (bound feels like it's blown out).

- Has Potenza front struts because of the coilover problem

- DVD player and motorised touch scren (1 DINN)

- Project Mu front brake pads

- Bosch 040 intank pump with relay from battery

- 2.5 months rego

- Hicas lock bar

- GTR rear cradle (suspension knuckles)

- 3 Inch Cat Back exhaust

- RB20 Gearbox

- VLSD

- Flywheel, HD Clutch/pressureplate

- RB20DET engine, loom, computer, afm, sidemount, etc

- 3 inch split pipe/screamer

 

* Car will come with different wheels (Evo rims or 15/16's).

* Greddy Intercooler is not included

Edited by Stinkypoo

Share this post


Link to post
Share on other sites

Hey everyone,

Selling my daily drive as I want some more money to start a new project.

 

1998 Nissan Pulsar series 2 SSS SR20

White Colour

SR20 engine, 5 speed, low 133,000kms

completely standard except for head unit and nismo gear knob

recently had new tyres on the rear and passed a roadworthy about 3 months ago with no worries

Has no oil leaks and never had an issue with it

Has full log books from brand new!

mongoose alarm system

Overall good condition with a few lil scratches and bumps as expected of it's age

Is a fantastic run around car and is great on fuel but still has some power

Tons of potential to modify or just as a clean reliable newish comfortable runaround (that can fit a set of wheels+tyres with room to spare!)

Has ACT Rego until June next year

 

$7000 negotiable can send pics in an e-mail or jump onto to Gumtree

 

Contact Kurt on: 0403583867 or kurt_the_dragon@hotmail.com

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×